The following video shows how you can easily assemble a lifting piston.

The following video shows how you can easily assemble the Vantage-Q drawer.

We have a table for calculating the weight of a door, which is necessary to know when choosing guy ropes and measurements.Depending on the material of the door, as well as its dimensions, the result will be the weight of the door (kg) that you can use to calculate to the necessary strength of the measure (Kg x cm).

The 35 mm cup is an industry standard, offering an optimal balance between stability and compatibility with different door thicknesses, guaranteeing a safe and sturdy installation.

The drilling range of 3 to 7 mm allows for flexibility in installation, adapting to different types of doors and ensuring a precise fit without compromising stability.

To ensure proper fastening, it is necessary to respect the drilling specifications of the shims, using Euro screws with a centre-to-centre distance of 32 mm and an entry depth of 12 mm.

The spring-loaded latch is designed to absorb impact and reduce wear and tear, providing smooth, controlled closing even on doors that are subject to frequent opening and closing.

In furniture with irregular finishes, the X92N hinges allow for depth, height and lateral adjustments by means of their three-dimensional adjustment, ensuring perfect closure and precise alignment.

No, this runner has different drawer mechanisms, as well as a different length.

The X92 elbow hinges are designed to fit perfectly on doors from 14 to 24 mm thick thanks to their three-dimensional adjustment system and standard 35 mm cup, ensuring an optimal and stable fit.

The clip-on mounting system allows for quick installation without additional tools, ensuring precise fastening and reducing assembly times on large volume projects.

The three-dimensional adjustment offers +/-2 mm height and side adjustments, as well as depth adjustments, allowing you to correct misalignments and ensure a perfect seal on custom-designed furniture.

The soft closing system avoids sudden impacts by cushioning the movement of the door, protecting both the hinge and the structure of the furniture, and prolonging the life of both components.

Pre-drilling should be carried out with a diameter of 35 mm, a depth of 3 to 7 mm and a centre-to-centre distance of 32 mm, which ensures a solid and precise fixing of the shims.

The 35 mm cup provides a larger contact area, increasing stability and allowing for a robust and durable installation in door thicknesses from 14 to 24 mm.

The depth adjustment by means of an eccentric screw allows precise control of the door position, correcting possible misalignments and ensuring a uniform and aesthetic closure.

The soft closing system automatically adapts to doors of different thicknesses, absorbing impacts and providing a controlled closure, ideal for intensive use in kitchen furniture and cupboards.

The clip mounting significantly reduces installation times, offering secure fixing without the need for additional tools, making it ideal for large-scale professional projects.

To install the 0-height supplements, pre-drilled holes with a diameter of 35 mm, a depth of 12 mm and a centre-to-centre spacing of 32 mm must be drilled to ensure optimum and aligned fastening.

The hinges are compatible with door thicknesses between 14 and 24 mm, ensuring correct installation on a wide variety of furniture.

The straight supplement allows a height adjustment of ±1.5 mm by means of an included eccentric screw, ensuring precise levelling after installation.

The soft closing is achieved by a damping piston integrated in the hinge, which reduces impacts and ensures controlled door movement.

The required drilling range for the cup is from D = 3 to 7 mm, ensuring correct alignment and fixing to the furniture door.

Both hinges and shims are made of nickel-plated steel, a corrosion and wear resistant material with an aesthetic finish that guarantees long life and performance.

The set includes specific screws for fixing to 35 mm cups and screws for the supplement, compatible with standard boards and ensuring a firm and precise installation.

The X91 elbow hinge allows three-dimensional height, depth and lateral adjustments thanks to its integrated eccentric adjustment and automatic clip mounting system.

These hinges have an opening angle of 105°, ideal for ensuring accessibility and functionality in kitchen, office or cupboard furniture.

The straight supplement allows ±1.5 mm height adjustment by means of an eccentric screw and has a design that remains concealed under the hinge arm once installed.

No, this batch is specifically designed for doors with a thickness of 14 to 24 mm and is not compatible with thicker thicknesses.

The drilling range required to install the hinges is 3 to 7 mm from the edge of the furniture, while the straight supplement requires standard drillings of 35 mm diameter.

The X91 super bend hinges are designed to withstand standard loads in kitchen, bathroom or wardrobe furniture, ensuring optimum performance even with heavy doors.

The perfect alignment of the door is guaranteed by the three-dimensional adjustment (height, depth and side) and the eccentric screw of the supplement.

Yes, the soft-close system is ideal for intensive use, as the damping piston reduces wear and improves the durability of the mechanism.

The straight supplement of this batch is distinguished by its compact design, which is concealed under the hinge arm, and by its full compatibility with the X91 and X92 hinges.

The kit includes synchronised full-extension slides, with cushioned closure and a load-bearing capacity of up to 40 kg.

The recommended board thickness for the bottom and back of the drawer is 18 mm.

The drawer front can be precisely adjusted by means of an eccentric of ±2 mm vertically and ±1 mm horizontally.

Yes, the metal components are made of steel with an anthracite grey painted finish, which enhances strength and aesthetics.

No, the kit includes all the necessary elements: guides, side ribs, front hooks and screws, so there is no need to purchase additional elements.

We have a table for calculating the pistons or dampners, where you can obtain a response with the furniture data.The choice will depend on the width and the height of the door, as well as the material it is manufactured out of, in addition to the stroke of the piston or damper itself.The result will be the number of pistons or dampners and the necessary strength of each one.

For the same force required in both folding and lift up doors, we recommend that you only use a single piston or damper in a door with a width of less than 450 mm, and that you use two pistons or dampers for a door that is wider than 450 mm.

Yes, the Pyxis luminaire can be cut and connected to each LED individually, allowing it to be adjusted to the length required for the project.

Requires pre-machining to embed it into the surface of the furniture, ensuring aesthetic and functional integration.

No, the LED converter is not included in the scope of delivery, but is necessary for operation (24V DC).

The luminaire includes 1 LED luminaire, 4 mounting clips, a 1.5 m cable with Miniled connection and a cover cap.

The Miniled connection cable has a length of 1.5 metres, ideal for easy installation.

The kit includes a cable with side cover, a 1.5 metre Miniled connector, a single cover cap and 3 mounting clips.

Yes, this kit is designed to be compatible with the Pyxis luminaire by cutting and adjusting its length according to the needs of the project.

The side cover with Miniled connector allows a quick and safe connection to the 24V DC converter, facilitating the mounting and integration of the luminaire.

Yes, the kit includes mounting clips and all necessary accessories to complete the installation.

The accessories are made of durable plastic, available in black or grey finishes to match the design of the space.

This will depend on the power consumption of each connected LED luminaire, but in total should not exceed a maximum power of 200W.

Yes, this transformer is designed with an overheating, overload and short-circuit protection system to ensure safe operation.

The distributor has 6 outputs for quick and easy connection of LED luminaires via MINILED connectors.

Yes, the transformer is equipped with an interchangeable cable that allows you to connect a different type of cable depending on the plug required in the target market.

No, this transformer is designed for indoor use or dry areas (IP20). For wet areas, a transformer with a higher protection rating is required.

The central vertical curved Gola profile is designed for installation in handle-free kitchen fronts, especially in tall units and pantry cabinets. It provides convenient access and modern aesthetics by eliminating visible handles.

The profile has a standard length of 2.35 metres, although it can be cut to any desired length to suit the needs of the furniture.

The profile is made of high quality aluminium with a white painted finish, which guarantees durability and resistance to wear and tear.

Yes, the Gola profile can be cut to size using suitable tools, allowing it to be adapted to different furniture projects.

The packaging includes a central vertical curved Gola profile with protection against scratches or damage during transport.

The kit includes 8 accessories for the Gola-R top profile, designed to ensure a perfect finish at the end of the furniture assembly.

These fittings are used for the ends of profiles, ensuring a precise fit and a clean finish on kitchen furniture.

No, the fittings are designed to be press-fitted, so no screws or tools are required for installation.

They are made of high-quality, resistant plastic, ensuring durability and impeccable aesthetics.

Yes, these accessories are compatible with all available Gola-R profile finishes, including matt white, black and matt anodised.

The Optima cutlery tray finishes are of high quality, with a design that ensures strength and durability, adapting to various kitchen styles.

Yes, the Optima cutlery tray is compatible with both Vantage-Q and Slim drawer systems, provided the module and size are compatible.

Optima cutlery trays are made of high-quality, resistant plastic, guaranteeing durability and ease of cleaning.

No, Optima cutlery trays are not designed to be cut, but are available in various sizes to fit different drawer sizes.

The modular design of the Optima cutlery tray allows you to reorganise kitchen utensils efficiently, maximising the space available inside the drawer.

The following video shows how the sliding door system for wardrobes is assembled.

In order to secure the rails of the Space + sliding door system, it is recommendable to use 4 x 25 mm screws (code 5032505) for 16, 18 and 19 mm units.

This system is compatible with sliding cabinet doors using the Emuca Space system in both 2- and 3-leaf configurations. Doors must have the Space system specific top track to properly accommodate the brakes.

The brake engages in the upper profile and acts on the carriage, damping the final movement of the door and holding it in a fixed position. This reduces impact, prevents bouncing and improves safety and closing comfort, especially in frequently used furniture.

No, the system is designed for installation without additional machining. The brake is installed directly on the top rail of the Space system and acts by pressure on the carriage. It is supplied with screws and Allen key for uncomplicated fitting.

Yes, it is essential to have the Space system specific top track and the corresponding carriages. The brake kit cannot be installed in isolation, as it needs to interact mechanically with these components to function properly.

To fix the rails of the Space+ sliding door system, we recommend using 4 x 25 mm screws (code 5032505) for 16, 18 and 19 mm modules.

According to the ISO: 7170:2005 standard, the bracket for circular hanging bars or round tubes can tolerate a maximum weight of 40 kg/metro uniformly spread out.

The following sketch shows details of the machining that should be carried out for the bracket of the Plus 7 aluminium profiles.

This bracket is designed for shelves using a Ø19 mm and Ø20 mm wedge joint system. It is compatible with 18 and 20 mm thick boards, facilitating its use in kitchen, home or office furniture with concealed mounting solutions.

The wedge system provides a robust and completely concealed fixing. It allows vertical and lateral fastening of the shelf without the need for visible screws, improving the aesthetics of the furniture and ensuring a firm and secure installation.

The base of the bracket measures 22 mm × 11.5 mm and is 2.2 mm thick. Its vertical fixing hole is Ø4 mm, while the hole for the wedge system is Ø7 mm. These dimensions allow precise and stable installation in predefined structures.

It is made of Zamak with a nickel-plated finish, which provides high mechanical resistance, durability against oxidation and a discreet and professional visual finish. Ideal for furniture exposed to frequent use or environments with moderate humidity.

Yes, the product is offered in industrial packaging of 2500 units, which makes it a cost-effective and efficient option for manufacturers, joiners and assemblers working in long production runs.

The following video shows how you can easily assemble the Inox plate racks.

The distance between the rods of the dish draining rack is 18 mm.Each of the rods is 7 mm wide.

The RAL code of the white finish of the Optima cutlery holder is approximately 9003. The RAL code of the grey finish of the Optima cutlery holder is approximately 7001. The RAL code of the anthracite grey finish of the Optima cutlery holder is approximately 7043.

The Optima cutlery holder has a wide range of models and sizes. The cutlery holder intended for the Vantage-Q drawer is not compatible with the Slim drawer. as a a cutlery holder model exists for the Slim drawer.Both models have the same depth but not the same width, specifically, the cutlery holders for the Slim drawer are 6 mm narrower than the cutlery holders for the Vantage-Q drawer.

The following video shows how you can easily assemble the Gola profile for ovens.

The finishes for these supports are RAL9006 for the aluminium colour and RAL8019 for the Moka colour.

It is installed by means of an adhesive base located at the bottom that is easily fixed to the floor without the need for tools.

The cylindrical shape allows for uniform impact distribution and unobtrusive aesthetics, making it ideal for spaces where it is desirable to minimise the visibility of the stop.

Each stop has a compact diameter of 42 mm, making them suitable for confined spaces, passageways and interior doors.

They are suitable for flat surfaces such as ceramic, wood, parquet, vinyl or PVC.

They are made of high-strength transparent plastic, combining durability with a virtually invisible design.

The dish drainer is made of AISI 430 stainless steel, a material resistant to oxidation in kitchen environments with high humidity. This guarantees durability against frequent contact with water, vapours and detergents, ideal for installation in domestic or industrial kitchen furniture.

The system includes 8 lateral fixing clamps, which allow the trays to be precisely adjusted to the cabinet in a specific range depending on the model (e.g. 385-420 mm for 450 modules). This type of side fixing provides a firm hold without the need for screwing to the back of the cabinet.

Periodic cleaning with a damp cloth and neutral detergents is recommended. It is important to avoid abrasive or chlorine products, as they may damage the passive layer of the steel. To maintain the original shine, specific products for stainless steel can be used.

Yes, thanks to its lateral adjustment system using tensioners, this dish drainer is compatible with custom-made modules as long as they respect the width dimensions established in each reference.

Yes, the trays for plates, glasses and the drip tray can be easily removed for cleaning or replacement, without the need to dismantle the whole unit. This facilitates regular maintenance in kitchens with intensive use.

The plate capacity varies depending on the specific model of Suprastar plate rack:

• M60: up to 20 standard plates
• M70: up to 24 standard plates
• M80: up to 28 standard plates
• M90: up to 32 standard plates

In addition, each model includes an additional tray for containers, allowing for optimised use of vertical space in tall kitchen cabinets. This configuration ensures efficient and safe distribution of kitchenware within the module.

It is made of steel with an aluminium painted finish, which makes it highly resistant to rust. The anchors are made of plastic and the drip tray is made of transparent plastic, preventing deterioration due to contact with water.

The assembly is carried out by screwing the anchors directly to the inside of the furniture, and includes the screws and 4 plastic strips to ensure the stability of the assembly.

The product is delivered with all components separately: 1 plate tray, 1 cup tray, 1 drip tray, 4 fixing strips and screws for individual assembly.

It is compatible with most 700 mm wide kitchen modules, especially European modular furniture, making it ideal for integration into mass production or refurbishment projects.

It is available in matt anodised and textured black paint, both with high wear resistance.

Subtract 27 mm from the overall size of the door to determine the exact size of the glass to be installed.

The profile is designed to accommodate 4 mm thick glass.

To ensure precise assembly, 3 mm must be subtracted from the interaxis dimension of the brackets when cutting the bar. This tolerance ensures that the bar fits without tension or play, optimising its durability and functionality.

The kit includes M5x38 mm screws, suitable for top installation in boards with sufficient thickness to thread or fasten anchors. Recommended for installation in materials such as MDF, chipboard or wood at least 16 mm thick.

They are designed for lateral fixing (left and right) and are suitable for standard bar lengths (up to 1.15 m). For longer spans or intensive use, it is recommended to combine with compatible centre brackets to avoid bending of the bar.

The brackets are available in Titanium, Black, Aluminium and Moka finishes, allowing them to be aesthetically integrated with other hardware and metal elements of the furniture. They are ideal for projects where design and functionality must be aligned.

These brackets are designed exclusively for Ø28 mm round bars. The use of bars with a different diameter (e.g. Ø25 or Ø30 mm) may cause play, misalignment or impossibility of installation, affecting both the safety and the aesthetics of the assembly.

Its function is to close and conceal the end of the Zero profile, preventing the exposed face from being exposed and improving the visual finish of the assembly.

The plug is placed at the end of the Zero profile, ensuring a clean finish on open or visible structures.

It is made of plastic, which makes it easy to install and light and resistant for use in furniture structures.

It is available in black and stone grey, allowing it to be combined with Zero profiles in the same colour.

Each unit includes 1 cap. The packaging is available in packs of 20 units per batch.

The height of the supplement affects the alignment of the door with the furniture: Height -2 mm: Allows lower adjustment for doors that need alignment correction. Height 0 mm: Maintains the standard hinge position with no change in height. Height 2 mm: Slightly raises the hinge position, useful for alignment or levelling adjustments.

This supplement is compatible with wooden doors and other materials from 14 to 26 mm thick, in combination with X95 hinges.

The diameter of the screw determines the type of fastening and stability of the insert in the door. A diameter of 5x9.5 mm provides a firm and secure fixing, ensuring better resistance to loads and mechanical stresses.

Yes, it is specifically designed to work with X95 hinges, ensuring optimum installation with height adjustment and three-dimensional alignment.

The nickel-plated finish provides increased corrosion and wear resistance, ensuring greater durability in wet or frequently used environments.

This supplement allows a firmer and more secure attachment of X95 snap-on hinges, improving their stability and alignment on the door.

Yes, it is specifically designed to work with X95 snap-on hinges, ensuring easy and efficient installation.

The installation is carried out by means of a pressure system, without the need for additional screws, which allows a quick and safe assembly.

The nickel-plated finish improves corrosion and wear resistance, providing greater durability in heavy use or wet environments.

Yes, it optimises the functionality of the hinge by providing a more stable and secure base, preventing misalignment with prolonged use.

Partial pull-out allows the drawer to slide only part of the way out, while full pull-out allows full access to the inside of the drawer.

Brave slides can carry up to 20 kg of load, making them ideal for storage drawers in kitchens, bathrooms, offices and other frequently used furniture.

These slides are available in depths from 300 mm to 500 mm. The choice of the right size depends on the size of the furniture and the space required for the drawer.

The soft closing system incorporates a damping piston that reduces the speed of closing, avoiding sudden knocks and prolonging the useful life of the drawer and the cabinet.

No, it is necessary to choose the specific version for each side of the drawer, as there are models for installation on the left side and models for the right side.

The Vantage-Q drawer kit supports a load capacity of up to 40 kg. The slides are designed with a push system for smooth and silent opening, ensuring a smooth glide.

The drawer ribs are equipped with staples designed to be fixed to the bottom of the drawer by machine, ensuring precision and robustness in assembly. They are compatible with any module width.

The drawer allows a vertical adjustment of ±2 mm and a horizontal adjustment of ±1.5 mm in the front fixing, facilitating precise adjustments for a perfect installation.

The materials used in the kit include epoxy painted steel, finished in white (RAL 9003) and grey (RAL 9006). These materials offer high resistance to wear and an excellent aesthetic finish.

The product code includes all the elements required for the assembly of an 83 mm high external drawer: runners, ribs, rear hooking set and a front hooking set for the external drawer. For complete installation, no additional components are required.

Vantage-Q slides incorporate a soft-close system that minimises resistance to use and provides a smooth, quiet glide, improving drawer comfort and durability.

These slides can carry loads of up to 35 kg, making them ideal for kitchen, bathroom and storage furniture that requires reliable sliding under medium loads.

They are available in depths of 270 mm, 300 mm, 350 mm, 400 mm and 450 mm, allowing them to be adapted to different drawer sizes according to the user's needs.

They are made of steel with a bright zinc-plated finish, which ensures high corrosion resistance and a modern aesthetic appearance. The material provides a long service life even in heavy-duty environments.

Installation is carried out by fixing the slides to the cabinet and the drawer with screws. It is important to make sure that both slides are level and aligned to ensure smooth sliding and to avoid misalignment of the lock.

The square rail section of the Slim drawer measures 23 mm by 13 mm and the section with trim measures 25 mm by 15 mm.

It is recommended to mount the guide rail synchroniser with push for the Slim drawer on units with a width of more than 600 mm.

It is recommended to mount the guide rail synchroniser with push for the Slim drawer on units with a width of maximum than 1,200 mm.

No, each drawer has a synchroniser accessory.

The following video shows how you can easily assemble the Vantage-Q drawer.

Yes, the bottom and the back of the Vantage-Q drawer have the same measurements for both the soft closing runners and the push runners.

The minimum unit depth required to install a Vantage-Q exterior drawer with push is calculated with the formula: Minimum depth = Depth + 38 mm. In this case the minimum unit depth needed will be 500 + 38 = 538 mm.

The minimum unit depth required to install a Vantage-Q interior drawer with push is calculated with the formula: Min. depth = Depth + 44 mm. In this case the minimum unit depth needed will be 500 + 44 = 544 mm.

In order to plan the design of a kitchen drawer unit with Vantage-Q drawers, we need to bear in mind several parameters, this work is made easier with a help table to configure those units.This calculation table makes it possible to calculate the position of the guides, depending on the dimensions of the unit and the number of drawers.Also, it makes it possible to choose different heights of drawer, consequently it calculates the height of the façade of each of them within the same unit.

In order to plan the design of a kitchen drawer unit with Vantage-Q drawers, we need to bear in mind several parameters, this work is made easier with a help table to configure those units.This calculation table makes it possible to calculate the position of the guides, depending on the dimensions of the unit and the number of drawers.Also, it makes it possible to choose different heights of drawer, consequently it calculates the height of the façade of each of them within the same unit.

We have different heights of sides and accessories that make it possible to create different types of drawers.You can design inner and exterior drawers, with a large capacity for saucepans, with rounded or square rails, with inside accessories and even glass sides.