The following video shows how you can easily assemble a lifting piston.

The X91 90° angle arm hinges feature a specialised design for corner and corner furniture, allowing precise and efficient installation in complex configurations. Their adjustability and soft-close system make them superior to standard models.

The 110° opening angle allows full access to the inside of the furniture, optimising functionality and facilitating daily use. This is especially useful in high-traffic furniture, such as kitchens and bathrooms.

These hinges feature an automatic clip system, which facilitates mounting to the supplement without the need for complex tools. In addition, the included screws and adjustable design simplify the installation process, reducing the time and effort required.

Their angled design allows corner furniture doors to open and close smoothly, making the best use of space. This makes them ideal for configurations where traditional hinges are not practical.

They include a three-dimensional adjustment system using eccentric screws, which allows the height, side and depth of the door to be adjusted. This ensures perfect assembly, even on uneven surfaces or furniture with tight tolerances.

We have a table for calculating the weight of a door, which is necessary to know when choosing guy ropes and measurements.Depending on the material of the door, as well as its dimensions, the result will be the weight of the door (kg) that you can use to calculate to the necessary strength of the measure (Kg x cm).

The 165° opening allows full access to the cabinet, improving functionality in applications where it is necessary to maximise space, such as corner cabinets or large storage cabinets.

The joint use of hinges and shims ensures secure support, improves door alignment and facilitates installation, especially in projects requiring high precision and durability.

Precise installation requires drilling holes 35 mm in diameter and 3 to 7 mm deep in the cup, ensuring that the doors are between 14 and 26 mm thick, and using the included screws to securely attach the shims and hinges.

The depth adjustment allows fine adjustments to be made to the position of the doors, correcting misalignments and ensuring that closing is smooth and functional, even on furniture with uneven surfaces.

Nickel-plated steel not only protects against corrosion and wear, but also provides an aesthetic finish, essential for furniture in wet or heavy use environments such as kitchens and offices.

The following video shows how to assemble runners for Silver drawer.

The following video shows how to adjust runners for Silver drawer.

Yes, the drawer measures are the same in the Silver and Slippe with partial and/or total extension with clips.

No, the drawer measures are different between.

No, the drawer length is 10 mm longer in the case of the Silver rail. Also, the position of the adjustment and locking pivot is different.

Yes, the drawer measurements, including its dimensions and machining, are fully compatible.This allows customers to mount the Silver total pull-out slides with push to open function and the Silver soft-close total pull-out slides on the same drawer.However, they are not compatible with the Slippe total pull-out slides with push to open function.

The installation must include a 35 mm diameter cup hole with a drilling range of 3 to 7 mm and respect a door thickness between 14 and 26 mm to ensure a precise fit.

The three-dimensional adjustment allows for height, side and depth adjustments, correcting misalignments and ensuring that the doors are perfectly aligned in technically demanding projects.

The shock absorbing piston ensures smooth and shock-free closing, reducing wear and tear on the hinges and protecting the furniture against repeated impacts in heavy use environments.

The board must be prepared with holes of 5 mm diameter and a depth of 12 mm, as well as a spacing of 32 mm between fixing points, to ensure the stability of the supplement.

The combination with 0-height supplements allows precise alignment of the doors, optimising their functionality and facilitating quick adjustments in modular and adaptable furniture design.

Yes, the drawer measurements, including its dimensions and machining, are fully compatible.This allows customers to mount the Silver partial pull-out slides with push to open function and the Silver soft-close partial pull-out slides on the same drawer.However, they are not compatible with the Slippe partial pull-out slides with push to open function.

Nickel-plated steel provides excellent corrosion and wear resistance, making the hinges ideal for wet or greasy environments such as kitchens and bathrooms, prolonging their service life.

The drilling range of 3 to 7 mm ensures a stable fixing of the hinges, preventing misalignment of doors and allowing precise installation even in demanding configurations.

The correct functioning of the soft closing is guaranteed by the damping piston, which absorbs impacts when closing the door, reducing noise and protecting both the hinge and the furniture from intensive use.

The three-dimensional adjustment allows adjustments of +/-2 mm in height, side and depth, correcting misalignments and ensuring perfect closing even on doors with complex installation.

These hinges comply with international quality and resistance standards such as ISO 9001, ensuring durability and performance in furniture subjected to intensive use and demanding conditions.

The locking pivots that are mounted on the Silver guide rails are designed in order to easily fasten the drawers to the guide rails, thus preventing them from falling during transportation or handling.These pivots avoid the use of additional screws and for their assembly you only need a small hole in the side of the drawer. In this manner the drawer can be assembled and disassembled as many times as you wish.

X91N super elbow hinges are designed for full overlap doors, offering greater flexibility in tight spaces, unlike standard straight or elbow hinges which are ideal for partial overlap configurations.

The pre-drilling should be 35 mm in diameter and a depth range of 3 to 7 mm, ensuring a tight fit and avoiding misalignment in door thicknesses of 14 to 24 mm.

The damping piston ensures a smooth and silent closing, reducing impacts on the furniture and prolonging the life of both hinges and doors, especially in frequently used furniture.

The eccentric adjustment allows depth adjustments to be made with millimetre precision, ensuring that doors are perfectly aligned, even on furniture with customised or irregular designs.

For efficient installation, the drilling specifications must be respected and the Euro screws included must be used, ensuring the correct fixing of the supplements to the furniture and facilitating quick adjustments in large-scale projects.

The 35 mm cup is an industry standard, offering an optimal balance between stability and compatibility with different door thicknesses, guaranteeing a safe and sturdy installation.

The drilling range of 3 to 7 mm allows for flexibility in installation, adapting to different types of doors and ensuring a precise fit without compromising stability.

To ensure proper fastening, it is necessary to respect the drilling specifications of the shims, using Euro screws with a centre-to-centre distance of 32 mm and an entry depth of 12 mm.

The spring-loaded latch is designed to absorb impact and reduce wear and tear, providing smooth, controlled closing even on doors that are subject to frequent opening and closing.

In furniture with irregular finishes, the X92N hinges allow for depth, height and lateral adjustments by means of their three-dimensional adjustment, ensuring perfect closure and precise alignment.

No, this runner has different drawer mechanisms, as well as a different length.

The X92 elbow hinges are designed to fit perfectly on doors from 14 to 24 mm thick thanks to their three-dimensional adjustment system and standard 35 mm cup, ensuring an optimal and stable fit.

The clip-on mounting system allows for quick installation without additional tools, ensuring precise fastening and reducing assembly times on large volume projects.

The three-dimensional adjustment offers +/-2 mm height and side adjustments, as well as depth adjustments, allowing you to correct misalignments and ensure a perfect seal on custom-designed furniture.

The soft closing system avoids sudden impacts by cushioning the movement of the door, protecting both the hinge and the structure of the furniture, and prolonging the life of both components.

Pre-drilling should be carried out with a diameter of 35 mm, a depth of 3 to 7 mm and a centre-to-centre distance of 32 mm, which ensures a solid and precise fixing of the shims.

The 35 mm cup provides a larger contact area, increasing stability and allowing for a robust and durable installation in door thicknesses from 14 to 24 mm.

The depth adjustment by means of an eccentric screw allows precise control of the door position, correcting possible misalignments and ensuring a uniform and aesthetic closure.

The soft closing system automatically adapts to doors of different thicknesses, absorbing impacts and providing a controlled closure, ideal for intensive use in kitchen furniture and cupboards.

The clip mounting significantly reduces installation times, offering secure fixing without the need for additional tools, making it ideal for large-scale professional projects.

To install the 0-height supplements, pre-drilled holes with a diameter of 35 mm, a depth of 12 mm and a centre-to-centre spacing of 32 mm must be drilled to ensure optimum and aligned fastening.

Maximum load capacity: Silver slides have a load capacity of up to 30 kg, which makes them ideal for domestic drawers with a considerable load.

Available adjustments: The guides allow adjustment in three directions: vertical (+3 mm), horizontal (+1.5 mm) and in depth (+3 mm), facilitating precise installation and a perfect fit.

Smooth closing: The self-closing system and the damping piston integrated in both slides prevent sudden shocks, prolonging the life of the drawer and offering a silent and smooth closing.

Depth compatibility: These slides are available in a variety of sizes, including depths of 290, 340, 390, 440, 490, 540 and 590 mm, adapting to different design needs.

Durability of design: They are made of zinc-plated steel, which ensures corrosion resistance and high durability, even under intensive use.

The soft closing system is guaranteed by a damping piston integrated in both guides, providing a smooth and silent sliding.

These slides have a maximum load capacity of 30 kg.

They offer a vertical adjustment of ±4.5 mm, allowing precise adjustment of the drawer position.

The rollers are made of delrin, a high quality material that ensures smooth running and optimum guidance in both horizontal and vertical directions.

The slides are available in depths of 250 mm, 300 mm, 350 mm, 400 mm, 450 mm, 500 mm and 550 mm.

The push-opening system allows the drawer to open automatically with a slight pressure on the front, eliminating the need for handles.

These slides have a locking pivot mounted on the slide itself, ensuring that the drawer remains closed until operated.

The slides offer a vertical adjustment range of ±4.5 mm for precise drawer adjustment.

The rollers are made of delrin, a high quality material that guarantees smooth and quiet running and optimum guidance in both horizontal and vertical directions.

These full-extension slides have a maximum load capacity of 30 kg.

These slides are compatible with drawer depths of 240 mm, 290 mm, 340 mm, 390 mm, 440 mm and 490 mm, depending on the model selected.

The push system allows the drawer to eject automatically when pressure is applied to the front of the drawer, eliminating the need for handles.

These guides offer a vertical adjustment range of ±5 mm for precise adjustment.

The locking pivot ensures that the drawer does not unintentionally dismount from the slide and maintains its stability.

These slides have a maximum load capacity of 25 kg.

The Silver concealed slide set supports a maximum load of 30 kg, ideal for home furniture.

These slides include a locking pivot mounted on the slide itself to secure the position of the drawer and prevent unintentional disassembly.

They offer a vertical adjustment of ±4.5 mm, which facilitates the precise adjustment of the drawer.

They are made of steel, which guarantees durability, strength and a smooth and quiet operation thanks to the high quality delrin bearings.

This model is available in depth lengths of 240 mm, 290 mm, 340 mm, 390 mm, 440 mm, 490 mm, 540 mm and 590 mm to suit various furniture design needs.

The diameter of hole that is used for the euro screws is 5 mm, as prior drilling is required to assemble those screws.

We have a table for calculating the pistons or dampners, where you can obtain a response with the furniture data.The choice will depend on the width and the height of the door, as well as the material it is manufactured out of, in addition to the stroke of the piston or damper itself.The result will be the number of pistons or dampners and the necessary strength of each one.

For the same force required in both folding and lift up doors, we recommend that you only use a single piston or damper in a door with a width of less than 450 mm, and that you use two pistons or dampers for a door that is wider than 450 mm.

Yes, they are compatible with all the accessories.Please note: Lynx Premium and Basic LED strips of 4.8 W/m, 9.6 W/m and 14.4 W/m are 8 mm wide, while the Lynx Premium LED strip of 28.8 W/m is 10 mm wide.

With this table you can calculate the total power of an LED strip.

The maximum recommended length of the installation of LED strips is indicated in our catalogue with a symbol on each LED strip.The table outlines the maximum recommended length if the power supply is only provided via one length (a converter). It also outlines the maximum recommended length if the power supply is provided via both ends (two converters) that multiply by two.Please note: To power the strip via both ends you need to create a special connection. Look up how can to ensure that the LED strip has the same brightness all along it.

The choice of a system for Agile lifting doors depends on the height and the weight of the furniture door. To do so, you simply need to follow these simple steps: 1. Check the height and weight of the furniture door. 2. Once you have obtained the values you need to calculate the strength of the spring, S = H * (W + 2 * Wh), in terms of: H = Height of the door in mm. W = Weight of the door in kg. Wh = Weight of the handle in kg. You can choose the lifting system according to what interval the strength of spring S falls under. The LOW interval is between 580 and 1,250, MEDIUM between 960 and 2,040, HIGH between 1,800 and 3,500, and EXTRA HIGH 3,200 y 9,000. For example, we have a door with a height of 400 mm and a weight of 5 kg, with a handle that weighs 0.22 kg. The strength of the spring would be S = 400 * (5 + 2 * 0.22) = 2,176. Therefore, we would choose the HIGH strength range because it is in the interval of 1,800 to 3,500.

In order to choose the correct converted for an LED strip it is necessary to: - Know the type of converter that corresponds to the LED strip. In our catalogue we indicate on each light the type of converter or transformer that must be used with a series of icons. - Find out the total power required of the converter (6 W, 15 W, 30W, 50W, 72W, 100W, 200W). In order to calculate the power of a specific length of strip, it is necessary to know what the total power of the 5m roll is (our sale unit) and what is the length of it that we need for installation. For example:If a 5 m strip (a roll) has a power of 24 W and I need will be for the installation a 2 m strip: X= (2m x 24W) / 5m = 9,6W Therefore, I will choose the 15W converter. Attention, it is necessary to add up the consumption amounts of the different strip accessories if they are included in the fitting.

The following video shows how you can easily assemble the Agile system.

The choice of a system for Agile One lifting doors depends on the height and the weight of the furniture door. To do so, you simply need to follow these simple steps: 1. Check the height and weight of the furniture door. 2. Once you have obtained the values you need to calculate the strength of the spring, S = H * (W + 2 * Wh), in terms of: H = Height of the door in mm. W = Weight of the door in kg. Wh = Weight of the handle in kg. You can choose the lifting system according to what interval the strength of spring S falls under. The MEDIUM interval is between 500 and 1,500, HIGH between 960 and 2,350. For example, we have a door with a height of 400 mm and a weight of 5 kg, with a handle that weighs 0.22 kg. The strength of the spring would be S = 200 * (5 + 2 * 0.22) = 1,088. Therefore, we would choose the HIGH strength range because it is in the interval of 960 and 2,350.

The use of the side spacer is necessary when the enclosure door coincides with the location of the frame and can collide with it, especially in enclosures with sliding or hinged doors.

A compatible screwdriver is required to install the Ø4x25 mm and Ø4x40 mm screws, according to the mounting specifications. No additional tools are required.

The spacer is 25 mm thick, which is the necessary distance to avoid collisions between the frame and the side of the enclosure.

This spacer is designed exclusively for the Hack pull-out frame, guaranteeing optimum compatibility with its slides.

Multiple spacers can be installed in a single enclosure if multiple Hack racks are used. Each package includes the components required for the installation of a single spacer.

The maximum recommended load for trouser rods depends on the type of installation and frame support, but they generally support up to 5 kg per rod without compromising stability or deformation.

Cabinet modules must have a Hack compatible frame, with internal dimensions suitable for the correct positioning of the rods, and ensure that the fixing surface is flat and strong.

Cutting or modifying the rods is not recommended as it may compromise their structural integrity and coating. In case of adjustments, it is preferable to use solutions custom-designed by the manufacturer.

Plastic end caps reduce noise by preventing direct contact of the metal with the frame and ensure a smooth glide during frequent use of the system, enhancing the user experience.

Yes, the rods are compatible with additional accessories such as Hack System organiser trays and other elements designed to optimise space in wardrobes and dressing rooms.

The auxiliary tray measures 396x120x146 mm, providing a compact but efficient space for storing small garments, accessories or similar items.

The tray is easily mounted on the Hack pull-out frame and is fully compatible with other accessories such as the trouser rods, shoe rack and organiser drawer, creating a versatile modular system.

It is made of plastic with a semi-transparent finish, making it resistant to moisture, easy to clean and suitable for use in a variety of locations, such as the bathroom or dressing room.

Yes, the tray can be used as a stand-alone item. It is ideal as a toy holder in children's rooms, an organiser in bathrooms or even for storing cleaning products.

The tray is designed to support the typical weight of lightweight garments and accessories. Its design optimises weight distribution, ensuring stability when attached to the Hack frame.

The Hack side shoe rack incorporates concealed slides with partial pull-out and soft close systems, providing a smooth glide and avoiding bumps when closing.

The trays can be adjusted in horizontal or 90° inclined positions. Adjustment is made by means of a simple clamping mechanism included with the trays.

It is available in left or right hand mounting versions. Installation varies according to the model selected, but both include a set of specific guides and screws to facilitate assembly.

The shoe rack is designed to support the typical weight of footwear stored on the three tilting trays. Its design optimises efficient organisation and access to footwear in confined spaces.

Made from steel with a textured painted finish, the Hack side shoe rack is resistant to moisture and wear and tear, ensuring long-lasting use in wardrobes and dressing rooms.

The tray dividers are attached to the base by means of a magnetic strip, allowing them to be positioned and adjusted securely and flexibly according to the user's needs.

The tray has a width of 483 mm (M60) and includes dividers designed to fit perfectly into the space available in 600, 800 and 900 mm Hack modules. This optimises storage by creating dedicated compartments.

The tray is built to support common wardrobe loads such as clothing and accessories. It is recommended to be installed on the Hack frame to ensure correct weight distribution and prolong its life.

The dividers can be arranged both vertically and horizontally thanks to their modular design and the magnetic strip on the base. This allows specific configurations for storing items such as shoes, accessories or folded clothes.

Manufactured from steel with a textured painted finish, the tray offers high resistance to moisture and wear and tear, making it ideal for heavy duty applications in walk-in wardrobes and cupboards.

The organiser basket has an ideal capacity for storing garments and objects. Its specific dimensions are 350x240 mm, optimised to fit Hack racks.

Yes, the organiser basket is compatible with trays and racks from the Hack system, allowing for versatile and functional integration into wardrobes and dressing rooms.

It is made of fabric with a grey textile effect finish, which gives it strength and an elegant design, suitable for everyday use in dressing rooms and wardrobes.

It is recommended to clean the basket with a damp cloth to preserve the grey textile finish. Do not machine wash or tumble dry to avoid damage to the material.

The folding design of the basket saves space when not in use, making it easy to transport and store without compromising its functionality.

The Jakarta furniture handle has a total length of 155 mm, which makes it suitable for various types of furniture.

The Jakarta handle is made of zamak, a corrosion-resistant and highly durable material, with a matt nickel finish.

The distance between the fixing holes is 128 mm, which makes it compatible with most standard furniture.

Yes, the matt nickel painted finish of the Jakarta handle is resistant to daily use and maintains its appearance over time.

Yes, the handle includes the screws necessary for its assembly, facilitating its installation on any piece of furniture.

Yes, it is possible to cut the 80 feet. To do so, you need to cut the foot at the leveller part, once this part has been disassembled, and make the cut with a cutting disk/saw that is suitable.

The Rize handle has a 160 mm spindle, ideal for kitchen, bathroom, home and office furniture.

The handle is made of zamak with a chrome finish, which offers a modern and corrosion-resistant design.

Yes, the handle can be installed in either horizontal or vertical orientation, depending on the furniture design.

The package includes M4 screws, suitable for doors with different standard thicknesses, ensuring a firm installation.

Each handle is individually packed to avoid knocks and scratches during transport and storage.

The following diagram shows the detail of the machining that you need to carry out on the table top of a table in order to fasten the plate of the 60 - 80 feet.

The rail has a total width of 10 mm and a height of 7 mm. It is designed to fit into a 10 mm wide by 6.9 mm high machining on the top or bottom of the cabinet. These dimensions ensure precise integration and optimal sliding.

The Ready track is intended for light to medium weight sliding doors in applications such as wardrobes, dressing rooms or modular furniture. It is recommended for use with hardware systems compatible with mortise profile.

The profiles are press-fitted into a machined groove, without the need for additional screws. Their design allows for invisible and clean fastening, facilitating final assembly.

The rail is made of matt anodised aluminium, which gives it excellent resistance to wear, oxidation and abrasion. It is ideal for frequently used environments due to its lightness, robustness and professional aesthetics.

Only a milling machine or CNC is required to groove the furniture. No screws, adhesives or special tools are required to fix the rail.

The following video shows how the sliding door system for wardrobes is assembled.

The Neco rail can be installed on melamine, MDF or chipboard surfaces. The use of structural adhesive or appropriate screws is recommended depending on the type of support. The base of the rail allows a flush fit to the bottom of the module, optimising the visual finish and the stability of the assembly.

This track is specifically designed for the bottom guide sliding door system and is compatible with the Emuca Placard model door system. It must be used in conjunction with a top profile and bottom wheels that fit into the 15mm wide channel of the track.

Combined with the Placard system components, this rail can support a load of up to approximately 50 kg per door, provided that the recommendations for mounting, wheel centring and module levelling are observed.

The rail is made of matt anodised aluminium, which provides excellent resistance to corrosion, scratching and frictional wear. This makes it a durable choice for heavy duty applications in both domestic and contract environments.

Each package includes 8 units of rails, each with a length of 2.35 metres. This makes it easy to optimise cutting and assembly in large volume projects or industrial installations.

According to the ISO standard: 7170:2005 Emuca supports can take a maximum weight of 40 kg per metre evenly distributed.

The direct mounting base allows faster installation by dispensing with the socket, reducing costs and assembly times. It offers direct attachment to the module with greater stability thanks to its large support surface and reinforced holes for Ø4 mm and Ø4.5 mm screws.

This base is specifically designed for 135 mm diameter Bone feet. The stretched circular coupling Ø11 mm high and Ø12.75 mm in diameter guarantees a perfect fit without the need for additional adapters.

Yes, the flat geometry and small dimensions of the base allow it to be used both on mechanised floors and in grooves for the integration of levellers. It is recommended to secure the anchorage by means of the four fixing points provided.

Thanks to its design with an additional central fixing hole, this base provides a firmer anchorage, minimising the risk of shifting or tilting in heavy or frequently moving furniture, such as industrial kitchen units or hotel installations.

The use of Ø4 or Ø4.5 mm wood screws with a length of at least 16 mm is recommended. To ensure a firm hold, it is recommended to screw with a torque-controlled electric screwdriver at low speed to avoid damaging the ABS plastic.

Direct mounting requires an 18 mm diameter, 10 mm deep circular cut-out on the back of the base. This housing allows the clamp to be press-fitted, ensuring a firm hold without the need for visible screws.

Yes, the clamp is compatible with wooden skirtings between 10 and 18 mm thick. Its design allows for a certain margin of tolerance, facilitating assembly on standard skirting boards used in modular kitchens or technical furniture.

The clamp is compatible with the full range of Emuca Bone levelling feet (fixed, adjustable, screw base or direct mount). It attaches easily to the side groove of the foot without the need for additional tools.

Screw mounting offers a more versatile installation, especially useful when the plinth has not been pre-machined. Direct mounting provides cleaner aesthetics and is ideal for fast assembly lines in production.

It is made of high-strength technical plastic, with a structural design that withstands tensile and lateral pressure. It has been tested for repetitive assembly and disassembly cycles without loss of fixation, ideal for removable plinths.

For the assembly of a plastic refrigerator base, such as the Frigo Base, you need the Bone kitchen feet and also the metric 10 (M10) screw from the same family, as the base has four holes for fixing the feet. The Frigo Base is also perforated for ventilation and designed for refrigerators integrated in 600 mm wide modules with tufting for assembly.

The recommended tightening torque for this screw is between 12 and 15 Nm. Exceeding this value may compromise the integrity of the plastic housing or cause deformation of the furniture structure.

Yes, it is made of high-strength zinc-plated steel, designed to withstand multiple installation cycles. Its hexagonal head allows easy access with a 6 mm Allen key without risk of rounding.

Unlike generic screws, this model is specifically machined for the upper coupling of the Bone foot. It provides greater mechanical strength, precise alignment and structural reliability in kitchen and industrial furniture.

This bolt has a standard metric thread M10 x 1.5 mm with ISO 6g tolerance, ensuring perfect compatibility with the metal nuts of the Bone system. It offers a firm and vibration resistant tightening.

The screw fixing provides a more solid and precise anchorage in furniture structures that require maximum stability, such as high modules or industrial installations. It allows small irregularities in the floor to be absorbed without structural misalignment.

The base requires a Ø10 mm hole for the fixing screws and a circular space for the Ø12.5 mm coupling flange. It is compatible with standard machining in kitchen units with raised plinth base.

Yes, this base has been designed to be fully compatible with Bone levelling feet of different heights (100-120, 150-180, etc.). Its geometry allows a firm and uniform hold regardless of the foot model.

The screw mounting base provides a more robust attachment and improves load distribution. It is especially recommended for furniture configurations with heavy loads or multiple legs per module.

To fix the base to the module, we recommend using screws Ø4.5 x 14 mm with chipboard or MDF thread. The holes are optimised to ensure that the tightening torque does not damage the plastic and provides a secure fixation over time.

Yes, the Moka trouser holder is available in two models, for assembly on either the right hand side or left hand side of the wardrobe, and to that end there are different codes. This completes the range of furnishing and storage options for your wardrobe or dressing room.

The following video shows how you can easily assemble the extractable shoe rack Moka.

Each castor supports up to 60 kg, so the 4-wheeled set can carry a total load of up to 240 kg, ideal for heavy duty home and office furniture.

These castors are fitted with ball bearings, allowing for smooth and quiet running, even on delicate surfaces or in high traffic areas.

Yes, the screws required for centre-hole plate mounting are included in the package, which facilitates immediate installation without additional accessories.

The set is made of steel with a black painted finish, combined with plastic elements, providing a modern and wear-resistant design.

Yes, the set consists of 4 castors with brakes, allowing total immobilisation of the furniture when necessary, ideal for areas where stability is required.

The following sketch shows details of the machining that should be carried out for the bracket of the Plus 17 aluminium profiles.

It is recommended to use a Ø5 mm drill bit to ensure precise insertion of the Euro screw. The drill hole should have a minimum depth of 11 mm and should be drilled to tight tolerances to avoid looseness or breakage of the material.

This screw is optimised for wood-based materials such as chipboard, MDF or melamine. Its design allows for strong fastening without the need for metal inserts, making it ideal for quick assembly of demountable furniture.

Emuca Euro screws are manufactured to DIN standards and meet TSCA Title VI assembly system strength requirements, offering maximum compatibility with modular structures in kitchen and office furniture.

The ideal torque for this screw is between 3.5 and 4 Nm. It is recommended to use torque-controlled screwdrivers to avoid head deformation or damage to the fastening material, especially in low-density boards.

The zinc plated finish provides superior corrosion protection and improves screw adhesion in porous materials. It is ideal for applications in humid environments or furniture that require a long service life without surface rust.

These brackets are designed to join wooden boards at 90° right angles and are particularly useful for modular furniture, cupboards and shelving structures that require strong and durable reinforcement.

The zinc-plated finish provides excellent protection against rust and wear, making them ideal for both indoor environments and workshops where high mechanical durability is required.

These brackets measure 70 mm long by 22.5 mm high, and are made of 1.5 mm thick steel plate, ensuring rigidity and adequate structural support at the point of attachment.

They have 4 Ø4.5 mm mounting holes that allow the use of standard self-tapping wood screws, which facilitates quick installation without the need for pre-drilling in most applications.

The brackets are available in batches of 50 units or industrial packs of 500 units, making them suitable for both do-it-yourself and mass production requirements in professional environments.

This screw is designed for joining accessories in the furniture sector, ideal for direct fastenings in wood or derivatives without the need for pre-drilling thanks to its self-tapping thread and sharp point.

The flat head allows for flush installation, ideal for invisible assemblies or where a clean finish is required. The allen footprint offers high torque and reduced risk of slippage during installation.

The zinc-plated coating provides excellent corrosion and wear resistance, ideal for installations in wet or mechanically demanding environments, such as kitchens or bathrooms.

It is optimised for wood, chipboard, MDF or melamine materials. Its tapered thread allows efficient penetration and a firm grip without damaging the material.

This model is available in 50 mm length and different finishes such as zinc-plated and black zinc-plated, which allows it to be adapted to both functional and aesthetic contexts in furniture installations.

The following video shows how you can easily assemble the abovementioned storage system in a kitchen.

Sut blinds can be adapted to different heights with a maximum height of 1500 mm. To do that, you simple need to cut the side rails and not fully unroll the blind. You need to bear in mind that the minimum gap for housing the blind box is 175 mm. However, the width of the Sut blind cannot be modified or cut, as this affects the pulling in mechanism of the blind.

The zinc-plated finish provides effective protection against rust and corrosion, which is essential to ensure the durability of the joining system even in wet environments.

This plunger is optimised for 14 to 18 mm thick boards and allows precise insertion into a 7 mm diameter hole, with an overall length of 12.5 mm, facilitating its use in multiple furniture assembly formats.

The plunger acts as the bolt receiving point within the System 10 system, ensuring a firm hold in furniture structures through quick and precise insertion, without the need for special tools.

The metallic steel body offers high mechanical strength and prolongs the life of the joint assembly, making it especially useful in industrial, contract or high traffic applications.

Each presentation includes 2,000 units, making it ideal for furniture manufacturers, wholesalers and assembly lines requiring efficient, large-scale assembly solutions.

In order to assemble the plastic base for the fridge, such as the Fridge Base, it is necessary to have the kitchen Bone feet as well as the number 10 metric screw thread (M10) from the same family, as the base as four holes for fastening the feet.The Fridge Base is also perforated for ventilation and designed for fridges to be integrated into 600 mm wide units with tufts for assembly.

The zinc-plated finish provides the bolt with excellent protection against rust and corrosion, making it a reliable choice for installations in environments with variations in humidity or intensive industrial conditions.

This bolt is installed by pressing it into a drilled hole. It has a diameter of 7 mm, a total length of 28.5 mm and an EU M6 thread, which guarantees a precise fit in System 10 systems with a board thickness of up to 18.5 mm.

It is designed for invisible joints in furniture structures such as beds, shelves and wardrobes. Its robust and discreet design ensures structural stability without compromising the aesthetics of the furniture.

This bolt is fully compatible with System 10 joining systems and requires machined holes for precise assembly. Its use with specific eccentric or tensioning elements allows assembly without the need for complex tools.

The System 10 hitch bolt is delivered in packs of 1000 units, which facilitates logistics and supply in large-scale assembly lines in the furniture industry.

The double-jointed design allows for variable angle joints in wood panels, adapting to multiple assembly configurations. This makes it ideal for custom assemblies or structures with non-orthogonal inclinations.

This bolt has been specifically designed to work with the components of the 10 mm hitch system, such as the corresponding plungers and bolts, ensuring a secure, aligned and robust assembly.

Manufactured from turned steel with a zinc plated finish, it offers high mechanical strength and excellent protection against rust and corrosion, making it a reliable choice for industrial applications and professional carpentry.

The bolt body has a diameter of 7 mm and a total length of 89 mm. The joint is located right in the middle, facilitating precise installation with fixing points at both ends.

It comes in packs of 500 units, which allows an optimum supply in medium volume projects, reducing supply time and facilitating management in warehouses or workshops.

This screw is available with Allen 3, Allen 6 and PZ2 heads. The Allen 3 head is recommended for more precise assemblies with lower torque, while Allen 6 and PZ2 are more versatile for general and automatic applications in production lines.

This screw allows installation in 12 mm boards and in an adjustable range of 14-16-18-22-26 mm, guaranteeing a secure grip on a wide variety of board thicknesses within modular or bespoke projects.

The screw is manufactured from steel with a zinc plated or black zinc plated finish, providing excellent protection against rust and corrosion, ideal for use in kitchens, bathrooms and industrial environments with high humidity.

It is designed to work in conjunction with System 10 coupling systems, being compatible with pins, double hinged pins and ring plungers from the same system, facilitating a robust and uniform integration.

What is the packaging format and how is it adapted to large productions?

This bracket is designed to accommodate glass panels that can be inserted vertically. Compatibility depends on the thickness of the glass and the fit with the Ø6.3 mm by 10 mm long clamping area of the bracket.

Yes, it incorporates a plastic surface that acts as a shock absorber between the screw and the glass, preventing damage from direct pressure or vibrations and providing a more secure and durable fixing.

The screw comes with a 20 mm long body by 8 mm diameter and a Ø6.3 mm thread. It is screwed directly into the vertical panel or cabinet casing, which allows for quick mounting without additional accessories.

The following video shows how you can easily install the Zero system.

The bracket is finished in nickel plating, which gives it high corrosion resistance, durability against humidity and a neutral aesthetic finish that easily adapts to visible glass furniture.

No, it is only necessary to screw the bracket onto the panel using the built-in screw. For increased safety of the glass, it is recommended to use it in conjunction with an additional bracket.

The Fit 8 expandable bolt offers superior grip thanks to its expansion system that is activated by inserting an eccentric. This allows for tight, aesthetic and play-free joints, ideal for modular and discreetly assembled furniture.

It is made of zinc-plated steel, which provides mechanical strength and corrosion protection, and plastic on the expandable part, which facilitates installation without compromising the fixing.

The bolt has a diameter of 8 mm, an overall length of 31.6 mm or 21.6 mm (depending on the model) and a specially designed end compatible with eccentrics. It is essential to check the drilling depth and compatibility with the connection system.

This bolt is designed for eccentric connection systems. Its special end allows a perfect fit in the counterpart, offering high stability without the need for additional tools.

It comes in boxes of 2,500 units, ideal for furniture manufacturers, industrial carpentry and distributors who work in serial assembly processes or ready-to-assemble furniture kits.

The Sut roller shutter system can cover modules up to 900 mm wide and 1500 mm high. The adjustment to different heights is carried out by changing the length of the guide rails easily and precisely.

The roller shutter kit includes the aluminium roller shutter slat, the top cover with fastener and the side covers. The guides must be purchased separately, as they are adjustable in length according to the needs of the module.

It is made of extruded aluminium with a matt anodised finish, giving it a professional feel and a modern aesthetic that is ideal for kitchen or office environments.

Assembly is straightforward: the roller shutter roller is fixed to the module and then the guides with their respective covers are inserted. No additional machining is required, which facilitates clean and efficient installation.

Yes, the roller shutter allows the winding and unwinding force to be adjusted via the roller system, which facilitates its use in high-frequency installations.

Yes, they use the same supplements, both without regulation and with eccentric regulation.

Yes, the overlaps are calculated using the same formulas.

The module must have a minimum internal width of 112 mm, a minimum depth of 460 mm and a minimum usable height of 800 mm.

It is compatible with furniture made of 16, 18 and 19 mm thick boards, which covers most standard configurations on the market.

It supports a maximum load of up to 30 kg, distributed between its 3 storage levels, making it ideal for bottles and heavy products.

The bottle rack is fixed laterally to the left side of the module by means of 2 roller guides with full extension and soft closing. The assembly is completed with screws included.

It ensures smooth and silent sliding during use, avoids slamming and allows full access to the 3 baskets, improving ergonomics and functionality in confined spaces.

It is made of steel with a painted or anodised finish and high-strength plastic components, making it highly durable and resistant to corrosion in damp environments such as dressing rooms or bathroom cabinets.

No, the rods have a fixed arrangement, optimised for hanging trousers without slipping. However, their spacing allows other garments such as scarves or belts to be hung.

It does not include its own damping system, but is compatible with soft-close hinges on the cabinet, which can improve the user experience if the cabinet has such slides.

It is recommended to use Ø4 mm x 16 mm screws (included) and a Phillips screwdriver for installation in the base of the cabinet or side of the module.

A minimum depth of 500 mm is recommended to guarantee the correct extraction of the 450 mm offered by the mechanism.

Yes, the drawer’s width and depth measures are the same. Only the lock pin machining is in a different position.

The shoe rack can be fixed directly to one side of the wardrobe or between two sides. It can also be installed at the back or side, depending on the design of the module.

It is made of chrome-plated steel and plastic with a metallic grey finish. This combination guarantees structural strength, durability in daily use and modern aesthetics.

Yes, the kit includes all the screws necessary for fixing in the various mounting configurations (side or side-to-side).

The central support provides an intermediate structural reinforcement, preventing bending or deformation of the bar in installations longer than 1 metre. It is especially recommended when a high load or intensive use is foreseen.

It is fixed to the top of the enclosure by means of an M6 screw. This type of thread provides a robust and secure fastening, ideal for professional or high-end furniture.

Yes, the bracket is specifically designed for 30x15 mm oval section bars, and is compatible with all models of this size, regardless of their finish or length.

It is made of zamak with an aluminium painted finish, which guarantees excellent mechanical resistance, durability and aesthetic finish. It is ideal for projects that demand technical and visual quality in all components of the enclosure.

This piece allows two or more Zero profiles to be connected in a firm and aligned manner, facilitating the creation of three-dimensional structures such as frames, corner pieces or "L", "T" or "U" configurations, without the need for welding or machining.

The connection is made by means of two Ø3.5x25 screws, which are inserted directly into the profiles. Only a standard screwdriver is required, without the need for specific tools or additional adjustments.

Yes, the piece is designed for the union of 2 or 3 profiles in modular configurations, which allows greater versatility in the design of structures for cupboards, shelving or room dividers.

It is made of zamak and available in stone grey (RAL 7048) and textured black (RAL 9005), which guarantees both structural strength and aesthetic integration with the Zero system profiles.

The part ensures a stable load transmission between profiles, maintaining the rigidity of the assembly and supporting the weight of shelves or hanging bars. It is ideal for installations requiring high load-bearing capacity and assembly precision.

The piston hitch is installed on the inside of the module, bolting it to the door frame to hold the opening piston securely.

The nickel-plated finish provides increased corrosion and wear resistance, which prolongs the life of the coupling and maintains its aesthetic appearance.

This latch is compatible with aluminium doors and wooden or aluminium PLUS 7-8-10 models, designed for piston opening systems.

Its design provides precise piston adjustment, ensuring that the piston does not shift or run over time, improving the stability and functionality of the system.

The packaging includes 100 units of piston clamps, recommended for projects requiring multiple fixing points on kitchen, bathroom or office furniture.

The hinge is specifically designed for interior glass doors, providing a smooth and safe opening system.

The hinge allows a maximum opening angle of 110°, offering a wide and comfortable opening.

It is made of zamak, an alloy of aluminium, magnesium and copper, which gives it high strength, durability and the ability to withstand heavy weights.

Installation is simple and only requires the use of screws and a screwdriver to press-fit to the inside of the door.

The hinge is available in two finishes: bright chrome and matt chrome, both ideal for combining with different styles of furniture.

This hinge is specifically designed for interior glass doors, providing secure installation and smooth opening.

The maximum opening angle of the hinge is 110°, which allows a wide and comfortable opening.

It is made of zamak, an alloy of aluminium, magnesium and copper, which gives it high strength, durability and the ability to withstand heavy weights.

Installation is simple and only requires the use of screws and a screwdriver to press and fix it correctly on the inside of the door.

The hinge is available in polished chrome and matt chrome finishes, allowing it to integrate with different styles of furniture and décor.

This magnetic lock has a holding force of 3.2 kg, ensuring that the door remains securely closed.

The magnet is screwed to the surface of the cabinet. The magnet is placed inside the cabinet and the metal plate on the door.

It is ideal for furniture with hinged doors in kitchens, bathrooms, wardrobes and other interior furniture where a secure and discreet closure is required.

It is made of steel and plastic with a white finish, which gives it strength and aesthetic integration into different types of furniture.

Yes, each lot includes 20 magnetic closures and 20 metal plates for installation.

Yes, it is compatible with pistons designed for wood and aluminium lift-up doors, specifically PLUS series models 4-11-14-15-16-17-18-19.

This latch is designed for wooden and aluminium doors. For glass doors, it is recommended to use a specific model for that material.

Yes, the coupling is fixed with screws on the inside of the cabinet module to ensure a firm hold of the piston.

It is made of steel with a nickel-plated finish, which gives it high resistance to corrosion and greater durability in kitchen and bathroom furniture.

Its main function is to serve as a fixing point for the piston, improving its stability and operation, but it is not designed to support the weight of the door on its own.

This latch is designed to be screwed directly onto the inside of the module and is compatible with lifting pistons used on aluminium or wooden doors of the PLUS 7-8-10 series.

It is optimised for aluminium doors with standard thicknesses, ensuring a firm, distortion-free fixation on thick profiles compatible with lifting piston systems.

The hitch is designed to provide structural support and stability to the piston, allowing the use in furniture with vertical opening doors with pistons designed for loads depending on the model of piston used.

The coupling has elongated holes to allow for precise installation adjustments. The use of standard diameter self-tapping screws is recommended for fixing to aluminium or wood.

Made of nickel-plated steel, it offers high resistance to corrosion and wear. Its finish meets the corrosion protection standards used in the metal furniture industry.

This hitch is designed to support pistons with a maximum load of 8 kg, ensuring stability and firmness in its installation.

Yes, it is designed to be used with vertical and lift-up opening pistons, provided that they are fitted with a mounting system that is compatible with side latches.

Installation is quick and easy, as no specialised tools are required. It is screwed directly onto the inside of the module, allowing for a stable fit.

It is made of nickel-plated steel for corrosion resistance and durability, ideal for kitchen and office environments where moisture can be a critical factor.

Its design is compact and unobtrusive, optimised for lateral screw mounting on aluminium or wooden surfaces. Its mounting format ensures that the piston is correctly aligned without unwanted movement.

This hinge is specifically designed for glass doors with a thickness between 4 and 6 mm, providing a firm and stable hold.

To install the bushing, it is necessary to drill a 9 mm hole in the base of the furniture where it will be placed. Then, the hinge is fixed by pressing the glass with screws, ensuring that it does not move.

It is made of stainless steel with an aluminium painted finish, giving it greater resistance to corrosion and an aesthetically pleasing design.

Each package contains 200 pieces, divided into 100 hinges for the right side and 100 for the left side.

It does not require intensive maintenance, but it is recommended to clean periodically with a dry cloth or a specific metal cleaner to maintain its appearance and functionality.

It is designed for use with NSDX compasses with drop absorption, providing a firm and stable hold on wooden hinged doors.

It is installed on the inside of the module where the compass will be fixed, ensuring that the door is securely fastened without displacement or misalignment.

It is made of nickel-plated steel, which ensures corrosion resistance, durability and secure mounting without deformation with continuous use.

The use of screws is recommended to secure it firmly to the furniture structure, ensuring correct alignment with the NSDX compass.

Each pack contains 20 pieces with nickel-plated finish.

This coupling is designed for hinged or lift-up doors, where the piston is fixed to the side of the furniture to ensure correct operation.

It is recommended to fix it with 3 mm diameter screws inside the module, thus ensuring a firm and stable fastening.

It is made of nickel-plated steel, which provides corrosion resistance, durability and an attractive finish.

Its function is to provide a firm support point for the piston on lift and folding doors, preventing it from moving or shifting in use.

Each package contains 100 units of the coupling.

The X50 hinge has a Ø35 mm short arm cup and is installed using 6 mm screws at a spacing of 48 mm.

It is designed for doors between 14 mm and 23 mm thick, providing a secure and stable fit.

It is three-dimensionally adjustable, allowing for height, width and depth adjustments, facilitating precise installation.

The cup drilling range is D = 3 to 8 mm, ensuring compatibility with different mounting configurations.

The X50 hinge allows an opening angle of 105°, which facilitates easy access to the inside of the cabinet.

The part offers an additional height of 3 mm, with a suitable accuracy of fit to ensure optimum door alignment.

It allows a fixed height adjustment of +3 mm, facilitating the adjustment of the door without the need to modify the body of the unit.

Made of high-strength nickel-plated steel, the supplement withstands the mechanical stresses generated by frequent use of the hinge without deformation or play.

We recommend the use of: Flat head screw Ø4 x 16 mm Tallow drop head screw Ø4 x 15 mm or Ø3.5 x 16 mm to ensure a stable and secure fixing to the furniture material.

No, the supplement is designed to maintain the same load capacity as the X50 hinge, as its nickel-plated steel structure prevents deformation under weight.

The hinge allows three-dimensional adjustment of the door position in height, depth and sideways, ensuring optimum alignment.

The mounting is bayonet-mounted, which facilitates quick and safe installation on the corresponding supplement.

The cup requires a diameter of 35 mm and a drilling range of 4 to 7 mm, which allows a firm and stable clamping.

Yes, it is designed to be installed on doors between 14 and 22 mm thick, offering a versatile solution for different types of furniture.

It has an integrated spring that acts in the closing direction, ensuring a controlled and safe movement of the door.

The following video shows how such a system is easily assembled:

Yes, although the use of two devices provides greater stability when opening. In addition, it is recommended to use two lifting systems on doors over 1 metre wide.

The X12 hinge allows precise adjustments by eccentric adjustment: Height: ±2 mm Depth: ±2 mm Side: ±1 mm This guarantees perfect alignment of the door even in installations with small variations.

For fixing the X12 hinge, screws with a diameter of 3.5 to 4 mm and a length of 12 to 16 mm are recommended, depending on the furniture material.

A properly installed X12 hinge can support up to 8 kg per unit. It is recommended to install at least two hinges on doors up to 600 mm high and three or more on larger doors.

This hinge is designed for doors from 12 to 18 mm thick. If the door is thicker than this, the hinge cup may not align properly and affect the opening and closing of the door.

No, the X12 hinge is designed exclusively for wooden doors or derivatives. For glass, specific hinges with pressure or adhesive fixing are required.

The X12 elbow hinge is designed for partially overlapping doors, which means that the door covers only part of the side of the furniture. In contrast, the X12 straight hinge is used for fully overlapping doors.

The X12 elbow hinge has a 26 mm diameter cup and allows a 95° opening angle, which facilitates easy access to the inside of the furniture.

No, the X12 elbow hinge is specifically designed for doors 12 to 18 mm thick. If the door is thinner or thicker, the installation may not be suitable and may affect alignment and locking.

Screws with a diameter of 3.5 to 4 mm and a length of 12 to 16 mm are recommended, depending on the furniture material.

The three-dimensional adjustment allows the following settings: Height: ±2 mm Depth: ±2 mm Sideways: ±1 mm These adjustments help to correct any misalignment after assembly.

The X12 super elbow hinge is designed for furniture where the door must fully retract into the furniture frame. In contrast, the X12 elbow hinge allows the door to partially overlap the side of the furniture.

The X12 super elbow hinge has a 26 mm diameter cup and an opening angle of 95°, providing convenient access to the furniture.

Snap-on (clip): SKU Model 1271607, facilitates quick installation without the need for additional tools. Screw-on: SKU Model 1270507, for traditional screw installation.

Yes, this hinge allows three-dimensional adjustment, which facilitates perfect alignment of the door: Height: ±2 mm Depth: ±2 mm Side: ±1 mm

It is recommended to install it on doors with a thickness between 12 and 18 mm, as a smaller or larger thickness could affect its correct functioning.

The X12 supplement allows the height of the X12 hinge to be adjusted to correct the alignment of the door. It is particularly useful when the door is not perfectly aligned with the furniture after initial installation.

This model is available in two versions: Height -2 mm (SKU 1270607): Reduces the hinge position by 2 mm. Height 0 mm (SKU 1270707): Maintains the standard position without changing the height.

It is designed for use with X12 hinges that require a 26 mm diameter cup, ensuring accurate installation on wooden doors.

It is fixed to the furniture with screws. The X12 hinge is mounted on the supplement, adjusting the desired height. It allows small corrections to be made to the alignment of the door without dismantling the entire hinge.

It is made of steel with a nickel-plated finish, which provides high corrosion resistance and increased durability in kitchen, office and home furniture.

The X12 Euro supplement is specifically designed for hinges with Euro system, which allows faster fastening by means of pre-installed screws and adjustment by means of eccentrics.

Height -2 mm (SKU 1270807): Reduces the height of the hinge by 2 mm. Height 0 mm (SKU 1270907): Maintains the standard height without modification.

This supplement is compatible with X12 hinges with Ø26 mm cup, used on wooden doors. Its adjustment system is ideal for hinges with Euro mounting, ensuring fast and accurate installation.

It is attached to the furniture using the integrated screws. The hinge is mounted directly on the supplement and is adjusted by means of the eccentric adjustment. Its mounting system facilitates adjustments without the need to dismantle the hinge.

It is constructed of steel with a nickel-plated finish, which provides high corrosion resistance and increased durability in kitchen, office and home furniture.

The supplement is designed to support the standard X12 hinge load, allowing an even distribution of the door weight. However, the final strength will depend on the type of material it is installed in and the number of hinges used.

This supplement is compatible with wooden doors between 12 and 18 mm thick, as it is specifically designed for use with Ø26 mm X12 cup hinges.

The height of the supplement affects the positioning of the hinge and the alignment of the door: Height -2 mm: Allows adjustments to correct minor door misalignments. Height 0 mm: Maintains standard alignment with no change in hinge position.

Not recommended, as it is specifically designed for the X12 hinge series with Ø26 mm cup. For compatibility with other hinges, it is best to consult the manufacturer's specifications.

The supplement allows for three-dimensional adjustment, which facilitates perfect alignment of the door through height, side and depth adjustments when used with compatible hinges.

The height of the supplement affects the alignment of the door with the furniture: Height -2 mm: Allows lower adjustment for doors that need alignment correction. Height 0 mm: Maintains the standard hinge position with no change in height. Height 2 mm: Slightly raises the hinge position, useful for alignment or levelling adjustments.

This supplement is compatible with wooden doors and other materials from 14 to 26 mm thick, in combination with X95 hinges.

The diameter of the screw determines the type of fastening and stability of the insert in the door. A diameter of 5x9.5 mm provides a firm and secure fixing, ensuring better resistance to loads and mechanical stresses.

Yes, it is specifically designed to work with X95 hinges, ensuring optimum installation with height adjustment and three-dimensional alignment.

The nickel-plated finish provides increased corrosion and wear resistance, ensuring greater durability in wet or frequently used environments.

This supplement allows a firmer and more secure attachment of X95 snap-on hinges, improving their stability and alignment on the door.

Yes, it is specifically designed to work with X95 snap-on hinges, ensuring easy and efficient installation.

The installation is carried out by means of a pressure system, without the need for additional screws, which allows a quick and safe assembly.

The nickel-plated finish improves corrosion and wear resistance, providing greater durability in heavy use or wet environments.

Yes, it optimises the functionality of the hinge by providing a more stable and secure base, preventing misalignment with prolonged use.

Partial pull-out allows the drawer to slide only part of the way out, while full pull-out allows full access to the inside of the drawer.

Brave slides can carry up to 20 kg of load, making them ideal for storage drawers in kitchens, bathrooms, offices and other frequently used furniture.

These slides are available in depths from 300 mm to 500 mm. The choice of the right size depends on the size of the furniture and the space required for the drawer.

The soft closing system incorporates a damping piston that reduces the speed of closing, avoiding sudden knocks and prolonging the useful life of the drawer and the cabinet.

No, it is necessary to choose the specific version for each side of the drawer, as there are models for installation on the left side and models for the right side.

Vantage-Q slides incorporate a soft-close system that minimises resistance to use and provides a smooth, quiet glide, improving drawer comfort and durability.

These slides can carry loads of up to 35 kg, making them ideal for kitchen, bathroom and storage furniture that requires reliable sliding under medium loads.

They are available in depths of 270 mm, 300 mm, 350 mm, 400 mm and 450 mm, allowing them to be adapted to different drawer sizes according to the user's needs.

They are made of steel with a bright zinc-plated finish, which ensures high corrosion resistance and a modern aesthetic appearance. The material provides a long service life even in heavy-duty environments.

Installation is carried out by fixing the slides to the cabinet and the drawer with screws. It is important to make sure that both slides are level and aligned to ensure smooth sliding and to avoid misalignment of the lock.

Vantage-Q ribs are made of steel for strength and durability. In addition, their design allows for precise assembly, ensuring stability in the drawer structure.

The 83 mm height is ideal for medium-sized drawers, providing a balance between storage capacity and compact design for kitchen, bathroom and office furniture.

Yes, the ribs allow for minor adjustments after installation to improve the alignment of the drawer, ensuring correct closing and smooth operation.

They do not require specific maintenance, although it is recommended to clean them periodically with a dry cloth to avoid dust accumulation and to ensure a good aesthetic appearance.

The choice of finish depends on the design of the furniture and aesthetic preferences. The white finish is ideal for a cleaner, more minimalist style, while the aluminium finish offers a modern, industrial look.

The following video shows how you can easily assemble the Vantage-Q drawer.

Yes, the bottom and the back of the Vantage-Q drawer have the same measurements for both the soft closing runners and the push runners.

The RAL code of the white finish of the sides of the Vantage-Q kitchen drawer is approximately 9003.The RAL code of the grey finish of the sides of the Vantage-Q kitchen drawer is approximately 9006.

In order to plan the design of a kitchen drawer unit with Vantage-Q drawers, we need to bear in mind several parameters, this work is made easier with a help table to configure those units.This calculation table makes it possible to calculate the position of the guides, depending on the dimensions of the unit and the number of drawers.Also, it makes it possible to choose different heights of drawer, consequently it calculates the height of the façade of each of them within the same unit.

In order to plan the design of a kitchen drawer unit with Vantage-Q drawers, we need to bear in mind several parameters, this work is made easier with a help table to configure those units.This calculation table makes it possible to calculate the position of the guides, depending on the dimensions of the unit and the number of drawers.Also, it makes it possible to choose different heights of drawer, consequently it calculates the height of the façade of each of them within the same unit.

We have different heights of sides and accessories that make it possible to create different types of drawers.You can design inner and exterior drawers, with a large capacity for saucepans, with rounded or square rails, with inside accessories and even glass sides.