We have a table for calculating the weight of a door, which is necessary to know when choosing guy ropes and measurements.Depending on the material of the door, as well as its dimensions, the result will be the weight of the door (kg) that you can use to calculate to the necessary strength of the measure (Kg x cm).

The elbow design allows for a partial overlap of the door, ideal for furniture with corner configurations or where space needs to be maximised without interference.

To ensure a secure fit, Euro screws must be installed in holes 5 mm in diameter and 12 mm deep, respecting the specified distances to maintain the stability of the hinge.

Three-dimensional adjustment ensures precise alignment, correcting misalignments in height, depth and laterality, which is essential for furniture that is subject to continuous or frequent use.

For perfect closing, the damped system requires correct cup adjustment and installation of the hinge within the drilling range of 3 to 7 mm, ensuring a smooth and silent movement.

Compatibility with 5x12 mm diameter screws ensures solid fastening in pre-drilled boards, facilitating assembly in systems with drill racks and guaranteeing the structural stability of the furniture.

This template set is compatible with Vertex, Concept and Convex drawers.

Templates allow precise marking of the position of the drawer front attachments, eliminating the need for manual measurements.

The kit includes only the marking templates, specifically designed to facilitate the installation process.

The inserts are made of durable plastic, ensuring durability and precision during use.

No pre-measurement is necessary, as the templates are designed for direct and precise marking without additional calculations.

The rear hooks allow rails to be fitted to drawers without the need to machine the side edges of the rear panel, facilitating installation.

The design of the fixture directly covers the side edges of the rear panel, eliminating the need for additional machining on the part.

With this set of rear hooks and a rail, it is possible to configure double or half-height drawers, adapting to different storage needs.

They are made of plastic with a durable finish, ensuring strength, lightness and an aesthetic appearance in keeping with the design of the drawer.

No, the accessory allows manual height adjustment without additional effort, offering an intuitive and efficient installation.

Silver L concealed slides are 340 mm deep and offer partial-extension, allowing efficient access to the drawer contents.

Silver L slides have a load capacity of 25 kg and are supplied in separate left and right hand versions.

These slides include an integrated locking pivot that prevents unintentional dismantling of the drawer, guaranteeing safety and stability.

They offer a vertical adjustment of +5 mm, which facilitates a precise adjustment of the drawer level in relation to the cabinet.

They are made of steel with a zinc plated finish, providing durability, corrosion resistance and a professional appearance.

It is important to ensure that the LED converter is compatible with the total power of the strip. For a safe installation, it is recommended to calculate the power consumption based on the 9.6W/m and add 20% extra capacity to the converter.

Yes, the LED strip can be cut every 3 LEDs. Cut only at the designated marks with insulated scissors and protect the exposed ends with suitable connectors or seal them to prevent short circuits.

The strip uses 3M™ 300LSE double-coated adhesive tape, which ensures strong and durable adhesion on clean, smooth surfaces. It is important to clean the surface with alcohol prior to installation for best results.

It is recommended not to exceed 5 metres per line without the use of signal amplification to avoid voltage drops that may affect the uniformity of brightness.

The IP20 rating is suitable for indoor use where it is not exposed to splashing water or excessive humidity. Ideal for furniture, shelving or indoor lighting.

The Kuma flexible spotlight uses energy-saving LED technology with a power of 2.1 W and energy efficiency class A++. It offers a colour temperature of 4,000 K (natural white) and a luminous flux of 150 lm, ideal for reading and work applications.

The integrated touch sensor allows the lamp to be switched on and off with a simple touch. In addition, with a long touch, the light intensity can be adjusted to suit different lighting needs.

The flexible spotlight arm has a lighting angle of 180 degrees, allowing the position and direction of the light to be precisely adjusted. This makes it especially functional for activities that require spot and adjustable lighting.

The two USB ports at the base of the spotlight are capable of simultaneously charging electronic devices such as mobile phones, tablets and other USB charging compatible equipment.

The kit includes 1 LED luminaire, a 30W constant voltage converter, and fixing screws. Installation is simple and instructions are included, making it easy to mount on desks, bedheads or other surfaces.

The Lynx flat diffuser profile is designed to completely cover the LED strips, allowing partial light to pass through thanks to its opaque white finish. This softens the illumination and eliminates visible light spots for a more uniform effect.

It has dimensions of 17.5 mm horizontal width and 5.7 mm vertical height, allowing it to perfectly cover standard LED strips while integrating unobtrusively into the design.

The diffuser profile is available in lengths of 2.35 metres and 3.9 metres, providing options to suit different project sizes.

It is made of plastic with an opaque white finish, which offers strength and a clean design, suitable for decorative and functional applications.

The package includes 20 units of the diffuser profile, ready for use. It is ideal for recessed or surface lighting projects in furniture, showcases and ceilings, where homogeneous and aesthetic lighting is sought.

IP44 is the name given to the index that a light or component has in order to protect itself against objects larger than 1 mm and that also have protection from liquid splashes in all directions. In this case, depending on the area where the lighting is located, it would be suitably for assembly in bathroom furniture.

The accessory for recessing in aluminium profile with curved diffuser improves the final finish of the mounting, providing a clean and aesthetic closure to the profile where the LED strips are installed.

The dimensions of the fitting are 12.7 mm high, 23 mm wide and 16.5 mm long overall. It is designed to fit perfectly into the 20 mm wide and 10 mm high profile channel.

It is made of grey plastic, which is strong, durable and easy to clean. This ensures good performance and a uniform appearance in the lighting system.

Installation is simple: the fitting is placed in the profile channel and the electrical connection cable of the LED strips is passed through it. Finally, the curved diffuser is press-fitted to complete the assembly.

The pack includes 20 units of the accessory, ideal for projects requiring aesthetic finishes on aluminium profiles with curved diffusers, such as furniture, showcases or decorative structures.

The fitting is 11.6 mm high, 23 mm wide overall, and 16.5 mm long, with a small overhang of 5 mm to facilitate fitting to the profile. These measurements ensure a precise fit and a professional aesthetic finish for the Lynx profile.

The kit is made of grey plastic, an impact resistant, durable and easy to clean material. This plastic is ideal for furniture applications due to its ability to maintain its shape and colour over time.

Installation is simple: first, the LED strip cable is fed through the hole in the fixture; then the fixture is snapped onto the profile, ensuring that it is fixed, and finally it is placed in the channel made in the furniture for a clean finish.

This kit is specifically designed for the Lynx recessed profile, ensuring perfect compatibility. It is not recommended for use with other profiles that do not belong to the same range.

For maintenance, it is suggested to clean the accessory with a soft cloth and non-abrasive products to avoid damaging the finish. This will help to preserve both its functionality and aesthetic appearance for a longer period of time.

The fixings are installed by screwing them directly to the furniture in the desired position. Once in place, the Lynx slanting profile snaps into place over the fixings, ensuring a firm and stable hold.

The kit allows the electrical connection of the LED strips in three ways: under the side cover, through a hole at a 90 degree angle, or through the back of the profile. It is recommended to use a drill to drill the necessary holes in the profile, ensuring that the wiring is properly insulated and protected.

All components are made of durable plastic, a lightweight and durable material that guarantees long-term performance. In addition, the grey finish provides a clean, unobtrusive look that matches the design of the profile.

Yes, both side covers and fasteners can be reused in the event of removal or relocation, provided they are kept in good condition. This makes them ideal for projects requiring flexibility.

The kit includes screws compatible with surfaces such as wood, MDF and other similar materials. The screws are designed to facilitate assembly, providing a secure fixing and preventing damage to the base material.

The side covers are easily fitted to the ends of the Lynx profile using the screws included in the kit. Once fixed, the LED strip cables are passed through the designed space and the profiles are snapped into place.

The kit includes screws suitable for mounting on surfaces such as wood, MDF and other similar materials. The screws are designed to provide a firm and stable fixing.

The side covers are made of durable grey plastic, which ensures durability and ease of cleaning, as well as providing an aesthetic finish that blends in with the design of the profile and furniture.

Yes, both covers and screws can be reused if the profile is dismantled or relocated, provided the components are in good condition. This makes them ideal for flexible or temporary installations.

This kit improves the aesthetics of installations by covering the ends of the profile, providing a clean and professional finish. It also facilitates cable management and ensures that the profile stays in place with easy installation.

The Crux LED spotlight requires a stable 12V DC power supply. It is necessary to use a suitable converter that supports the total power of the installed spotlights, considering 1.8 W per unit.

The spotlight is fixed to the furniture by means of its recessed design. It is important to drill a 60 mm diameter hole with suitable tools to ensure a perfect fit in materials such as wood, MDF or chipboard.

A 12V DC LED converter with a watt rating greater than the total power of the installed spotlights is recommended. For example, for 6 spotlights, the converter should handle at least 10.8 W (1.8 W x 6) with an additional margin for safety.

Yes, it is possible to combine 4500K and 6000K lamps in the same installation. However, it is recommended to plan the distribution to avoid visual inconsistencies and to maintain harmony in the illuminated space.

To maintain the performance of the spotlight, it is suggested to clean it periodically with a soft, dry cloth. Avoid using abrasive products that may damage the finishes and regularly check the electrical connections to ensure optimum performance.

The Lynx curved diffuser profile has a height of 17.4 mm, a width of 15.4 mm and a thickness of 5.9 mm. These dimensions allow the diffuser to fit perfectly over LED strips and to be securely clamped into the corresponding profile tabs.

The transparent-opaque plastic provides homogeneous light diffusion, reducing glare and shadows, while hiding the direct view of the LEDs. This enhances aesthetics and creates a soft and pleasant illumination.

Installation consists of placing the diffuser on the profile that houses the LED strip. This is done by pressure using the tabs of the profile as a support. No additional tools are required, but it is recommended to clean the surfaces before installation.

Yes, the profile can be cut to size using tools such as precision saws or plastic cutters. It is important to make clean cuts and avoid edge damage to ensure a good fit.

The curved design of the diffuser optimises light distribution, creating a more uniform effect and reducing bright spots. This makes it ideal for decorative and functional applications in furniture or interior spaces.

The kit includes 3 clips to attach the aluminium profile to the cabinet and 2 side caps to close the ends, providing a secure installation and a professional aesthetic finish. The clips are placed over the LED strip in the trunking and hold the profile securely in place.

This kit is specifically designed for the Lynx flat diffuser profile and is not compatible with other profile models in the Lynx range. Its design ensures a perfect fit with the corresponding profile.

The brackets are fixed directly to the furniture channel. It is important to ensure that they are correctly aligned and securely fastened before the aluminium profile is pressed onto them.

The kit's parts are made of durable grey plastic, which ensures durability and an unobtrusive appearance that matches different furniture designs. This material is also easy to clean and maintain.

For a professional finish, first make the trunking in the cabinet to the precise measurements, fit the clips and LED strip in position, and finally fit the aluminium profile and side covers to complete the installation.

The Aquarius LED spotlight has an output of 7W, a luminous flux of 480 lumens and a cool white colour temperature of 6000K, providing bright and functional lighting for spaces such as bathrooms.

The IP44 certification ensures that the spotlight is protected against splashing water and small solid objects, making it ideal for use in wet areas such as bathrooms.

Installation is simple: the spotlight is supplied with the necessary screws to fix it to glass surfaces, table tops or furniture. Simply mark and drill the mounting points and tighten the screws to secure the spotlight in position.

The opal diffuser distributes the light evenly and eliminates reflections or glare, creating a pleasant ambience and improving the aesthetics of the lighting.

No, this LED spotlight does not need an additional converter, as it is designed to be connected directly to a 230V AC socket, simplifying installation and reducing additional costs.

The following video shows how you can easily install the aforementioned LED lighting.

The following video shows how you can easily install the aforementioned LED lighting.

The Lynx W diffuser profile is designed with precise dimensions to perfectly fit 8 mm wide LED strips, ensuring a secure installation and a movement-free fit within the Lynx W aluminium profiles.

The translucent polycarbonate material allows for an even distribution of light, eliminating visible light spots and creating homogeneous illumination. It is also strong, durable and easy to clean.

Yes, the Lynx W diffuser profile can be cut to size. For a clean and precise cut, it is recommended to use a fine-toothed saw or a specific cutting tool for polycarbonate.

This diffuser profile is ideal for applications in home furniture, offices, kitchens and bedrooms, where integrated and discreet lighting is desired. It is perfect for cabinets, shelves and under kitchen furniture.

By using the Lynx W diffuser profile, the light from the LED strips is evenly distributed, eliminating glare and improving the aesthetics of the lighting project. This results in soft and professional lighting in any space.

The following video shows how you can easily install the aforementioned LED lighting.

To install the Lynx W profile, the furniture must be machined to a width of 14 mm and a depth of 11 mm. These dimensions guarantee a perfect and secure fit of the profile.

The aluminium profile with painted or anodised finish offers high resistance to corrosion and wear. In addition, its finish enhances the aesthetics and can be combined with different styles of furniture.

Yes, the Lynx W profile can be cut to size. It is recommended to use a thin-cutting saw or aluminium specific tools to obtain a clean cut and avoid deformation.

This profile is ideal for lighting projects in kitchen furniture, wardrobes, offices and bedrooms. Its design allows discreet integration of LED strips, providing functional and decorative lighting.

The Lynx W profile is designed to be compatible with Lynx Q and Z sensors and cables, ensuring easy installation and optimal operation of the lighting system.

The Lynx W surface-mounted profile is installed using screws directly into the furniture. It is recommended to use a drill for pre-drilling and a screwdriver to tighten the screws.

The painted or anodised finish provides corrosion resistance and high quality aesthetics. This makes it ideal for projects where design and durability are important.

Yes, the profile can be cut to size. To ensure a clean cut, it is recommended to use a fine-toothed saw or a specialised aluminium tool and to protect the edges of the profile with adhesive tape during cutting.

The Lynx W profile is compatible with 8 mm wide LED strips and accessories such as Lynx Q and Z sensors and cables, ensuring simple and functional integration.

This profile is ideal for lighting projects in kitchen furniture, wardrobes, offices and bedrooms, offering a decorative and functional solution for surface lighting.

The following video shows how you can easily install the aforementioned LED lighting.

The fittings are designed as end caps for the Lynx W profile, providing a uniform finish and concealing visible connections. They also facilitate cable routing thanks to their grooved design.

These fittings are small enough to integrate perfectly with 8mm wide LED profiles and strips and are compatible with Lynx Q and Z sensors and cables.

Installation is simple: just insert the end caps into the ends of the Lynx W profile and feed the cables through the groove of the fitting. This ensures a tidy and functional electrical connection.

They are available in white, black and grey finishes, allowing them to be combined with different styles of furniture to maintain a homogeneous aesthetic.

These fixtures are ideal for home, office and bedroom furniture applications where integrated lighting and discreet, professional finishes are required.

The Lynx W accessory kit includes two side covers and mounting screws. Their main function is to provide a uniform finish to the Lynx W surface profile and to facilitate the cable routing of the LED strips.

The fixtures are designed for 8 mm wide LED strips, with a small footprint for perfect fit and easy integration into Lynx Q and Z profiles and systems.

The lower cable outlet, equipped with a groove, allows the cables to be routed neatly and safely, facilitating the electrical connection and improving the aesthetics of the project.

The accessories are available in white, black and grey finishes, offering versatility to match different furniture styles and maintain a cohesive design.

Yes, installation is simple and requires no specialised tools. The package includes the screws required to attach the covers to the Lynx W surface profile, ensuring a quick and secure installation.

The following video shows how you can easily install the aforementioned LED lighting.

The integrated front LED lighting of the Pegasus mirror has a colour temperature of 4000K, providing natural light that enhances visibility and brings out facial detail without creating distracting shadows.

The mirror has an anti-corrosion treatment and an IP44 protection rating, which makes it resistant to moisture and splash water, ideal for wet environments such as the bathroom.

The dimensions of the mirror are 600 x 700 mm, with a glass thickness of 4 mm, making it a compact and stylish solution for bathrooms of any size.

The package includes the mirror, brackets, dowels, installation hooks and detailed instructions. A drill and screwdriver are recommended for safe installation.

This mirror is perfect for residential and commercial bathrooms, thanks to its modern design, functional lighting and resistance to wet conditions, offering durability and style.

The Cassiopeia mirror's integrated anti-fogging system prevents condensation from forming on the surface, keeping it clean and functional even in bathrooms with high humidity after hot showers.

The decorative LED backlighting, with a colour temperature of 4000K, creates a warm and modern atmosphere, ideal for enhancing bathroom lighting without creating shadows and providing a sophisticated aesthetic design.

The mirror has a diameter of 60 cm and a thickness of 4 mm, making it a compact and stylish solution for bathrooms of any size, from residential to commercial.

The package includes the mirror, brackets, dowels, installation hooks and detailed instructions. A drill, levelling tool and screwdriver are recommended for installation.

This mirror is ideal for domestic bathrooms and hotels, thanks to its resistance to moisture and splashes (IP44), combined with an elegant design that adapts to modern and minimalist styles.

The following video shows how you can easily install the aforementioned LED lighting.

Yes, they are compatible with all the accessories.Please note: Lynx Premium and Basic LED strips of 4.8 W/m, 9.6 W/m and 14.4 W/m are 8 mm wide, while the Lynx Premium LED strip of 28.8 W/m is 10 mm wide.

The Lynx W recessed profile requires 14 mm width and 11 mm depth machining in the cabinet for proper installation.

The Lynx W diffuser profile is made of polycarbonate, which homogenises the light and eliminates visible spots, ensuring uniform illumination.

This profile set is compatible with 8mm wide LED strips and is ideal for lighting projects in home furniture, offices, wardrobes and bedrooms.

The recessed profile is made of aluminium with a matt RAL 9016 finish, while the diffuser profile is made of polycarbonate, materials that offer high durability and resistance to wear and tear.

Yes, the profile can be cut to size. It is recommended to use a thin-cutting saw or a specialised aluminium tool for precise and clean cuts.

The Lynx W surface profile set is installed by screwing it directly onto the surface of the furniture. It is a simple process that requires no additional machining.

The Lynx W diffuser profile is made of polycarbonate, which allows a uniform diffusion of light, eliminating visible spots and providing homogeneous illumination.

This profile set is compatible with 8mm wide LED strips and Lynx Q and Z sensors and cables, making it ideal for multiple lighting projects.

The profiles are made of aluminium with matt finish RAL 9016 and polycarbonate, materials that guarantee high wear resistance and a long-lasting aesthetic appearance.

Yes, profiles can be cut to size. It is recommended to use tools such as thin-cutting saws or specialised tools for aluminium and polycarbonate to obtain clean and precise cuts.

To install the Lynx profile set, a 20 mm wide and 11 mm deep cut-out in the cabinet is required.

End caps for the profiles are not included in the kit and must be purchased separately.

The matt anodised finish provides a corrosion and wear resistant surface, as well as an elegant and uniform appearance.

Yes, profiles can be cut to size. It is recommended to use an aluminium thin-cutting saw or a specialised cutting tool to ensure precision and clean edges.

Once the profile has been machined, it is embedded in the furniture. It does not require additional screws for fastening, as it is secured by pressure or tightening.

The Lynx surface profile set is installed by screwing the aluminium profile directly to the surface of the furniture, which ensures simple and fast installation.

The curved diffuser profile is 17.4 mm wide and 4.4 mm high, while the aluminium profile is 18 mm wide and 10.7 mm high. Both have a length of 2.35 m.

End caps are not included in the kit and must be purchased separately if a more aesthetic finish is required.

The matt anodised finish provides increased wear resistance, corrosion resistance and a modern and elegant look that suits different furniture designs.

Yes, the profiles can be adjusted to specific dimensions by cutting them with specialised tools, such as a thin-cutting saw for aluminium or a precision hand-held cutting tool, ensuring clean, burr-free edges.

The Lynx surface inclined profile set is compatible with 8 mm wide LED strips, ideal for decorative and functional lighting systems.

The included aluminium profile has a slanted design that facilitates the orientation of the light towards the interior of the furniture or installation area, optimising the illumination.

Yes, the curved diffuser profile is designed to homogenise the light emitted by the LED strips, eliminating visible spots and achieving uniform illumination.

For installation, we recommend tools such as an electric screwdriver to screw the profile to the furniture and a thin-cutting saw to adjust the length of the profile if necessary.

No, the kit does not include screws. These must be purchased separately to complete the assembly of the profiles on the furniture surface.

The Virgo LED spotlight has a length of 300 mm, making it compatible with standard mirrors and furniture in bathrooms and other interior spaces.

IP44 protection ensures that the spotlight is resistant to moisture and splash water, making it ideal for use in bathrooms or other wet areas.

Yes, the spotlight includes all the elements necessary for installation, such as screws, multifunctional bracket and mounting instructions.

The Virgo spotlight's mounting system is compatible with glass, wood or board surfaces, allowing it to be installed on a wide variety of furniture.

Yes, the design and functionality of the Virgo spotlight also make it suitable for other environments such as kitchens or corridors, providing uniform and decorative lighting.

With this table you can calculate the total power of an LED strip.

The maximum recommended length of the installation of LED strips is indicated in our catalogue with a symbol on each LED strip.The table outlines the maximum recommended length if the power supply is only provided via one length (a converter). It also outlines the maximum recommended length if the power supply is provided via both ends (two converters) that multiply by two.Please note: To power the strip via both ends you need to create a special connection. Look up how can to ensure that the LED strip has the same brightness all along it.

The Rigel LED luminaire's vibration sensor is automatically activated when the drawer is opened by detecting movement, and switches off after 12 seconds without detecting additional vibrations.

The rechargeable lithium polymer battery has a capacity of 850mAh, offering an autonomy of 600 power cycles per full charge. Charging time is approximately 2 hours using a 5V DC 0.5A USB charger and the included micro USB type B cable.

The luminaire can be installed in two ways: With screws, for fixed mounting inside the drawer. With double-sided adhesive tape or adhesive magnet, allowing tool-free mounting and easy removal for recharging.

Included in the package: a rechargeable LED luminaire, screws, adhesive magnet and double-sided adhesive tape. These options ensure quick and easy mounting without the need for additional tools.

No, this luminaire is designed for dry areas and is ideal for drawer or cabinet interiors. Its IP20 rating does not make it suitable for wet or outdoor environments.

The integrated motion sensor has a detection range of 2 metres and an angle of 120°. The luminaire automatically switches off 18 seconds after motion is no longer detected.

The 850mAh lithium polymer battery fully recharges in less than 2 hours using a 5V DC 1A USB charger (not included).

No, the luminaire does not allow the light intensity to be adjusted manually, but the twilight sensor ensures that the luminaire switches on only when the ambient light is insufficient.

The wall light is compatible with adhesive metal surfaces or with screws in materials such as wood or glass. The magnetic system facilitates installation and removal.

The battery has an estimated autonomy of 400 on/off cycles per full charge, and its lifetime depends on usage and charging conditions.

The proximity touch sensor is activated when you pass your hand over a distance of 7 cm, switching the luminaire on. If you swipe your hand again, it switches off automatically.

The 850mAh rechargeable lithium polymer battery has a battery life of approximately 400 on/off cycles per full charge.

The wall light can be easily attached to metal surfaces using the included magnetic adhesive bases. It can also be installed using screws for greater stability on non-metallic materials.

Yes, the luminaire allows manual adjustment of the colour temperature between 3000K, 4000K and 6000K by pressing the dedicated button.

The applique is recharged using a 5V DC 1A USB charger (not included) and a 30cm micro USB Type C cable (included). Full charge time is less than 2 hours.

In order to choose the correct converted for an LED strip it is necessary to: - Know the type of converter that corresponds to the LED strip. In our catalogue we indicate on each light the type of converter or transformer that must be used with a series of icons. - Find out the total power required of the converter (6 W, 15 W, 30W, 50W, 72W, 100W, 200W). In order to calculate the power of a specific length of strip, it is necessary to know what the total power of the 5m roll is (our sale unit) and what is the length of it that we need for installation. For example:If a 5 m strip (a roll) has a power of 24 W and I need will be for the installation a 2 m strip: X= (2m x 24W) / 5m = 9,6W Therefore, I will choose the 15W converter. Attention, it is necessary to add up the consumption amounts of the different strip accessories if they are included in the fitting.

It is compatible with Lynx 8mm wide LED strips and accessories such as Lynx Q and Z sensors and cables.

Requires machining in the cabinet with a width of 14 mm and a depth of 11 mm.

The side covers are made of white plastic, and the diffuser profile of white polycarbonate which homogenises the light. The recessed profile is made of painted or anodised aluminium, depending on the model.

No, the LED strip is not included in the set.

The bars are supplied in a length of 2.35 m, in a cardboard tube together with the side covers.

The following video shows how you can easily install the aforementioned LED lighting.

The shoe drawer is available in two heights: 482 mm (M60) and 782 mm (M90), compatible with 600 mm, 800 mm and 900 mm wide Hack modules, with a minimum depth of 450 mm.

The anchoring system is based on 6 high-strength plastic parts that secure the attachment to the frame by means of screws. This guarantees structural stability even under maximum loads.

The painted finish, either textured black or stone grey, is designed to resist abrasions and maintain its appearance under heavy use in residential and commercial applications.

It is made of powder-coated steel, which provides corrosion resistance and excellent mechanical behaviour against impact and deformation.

The modular design allows the drawer to be combined with different Hack accessories, adjusting the space configuration to optimise storage according to the size of the modules and the number of shoes.

The kit includes 2 soft closing devices, designed to dampen the movement of a sliding door, ensuring a controlled and silent closing.

The Flow inverted soft close is designed for symmetrical sliding doors, allowing installation on both top and bottom profiles, increasing its versatility compared to other systems that only work in one direction.

Yes, the system is compatible with 30 kg and 50 kg doors, ensuring optimum performance and adapting to the needs of various furniture projects.

The system does not require frequent maintenance due to its high quality materials, but it is recommended to periodically check the fastening of the screws and clean the guides to avoid dust accumulation.

No, the soft close can be installed directly on the guide profiles without the need for pre-machining, which makes it easy to install in different types of enclosures.

The brake ensures a smooth and controlled closing of the sliding doors, avoiding sudden shocks and improving the safety and durability of the system.

The brake is 68 mm long, 19 mm high and 12 mm wide, allowing for easy installation in the track without taking up much space or interfering with the operation of the doors.

No, this brake is designed specifically for the Flow system and requires Flow caps for installation, ensuring compatibility and optimum performance.

It is made of high-strength grey plastic, which makes it light but robust, ensuring a long service life and easy maintenance.

The packaging includes 40 units, making it easy to use for multiple or large installation projects.

The cover improves the aesthetic finish of the track, prevents dust accumulation and increases safety by covering the exposed ends of the Flow sliding door system.

A drill bit of 16 mm diameter and 13 mm depth is required to drill the mounting hole. Its design allows for quick assembly and disassembly by means of a snap-in anchor.

No, these covers are designed exclusively for the Flow sliding door system, guaranteeing a perfect fit and optimum functionality.

The lid has an overall size of 19 mm wide, 17 mm deep and 15 mm high. Its compact shape ensures a discreet and elegant finish.

The packaging contains 40 units, ideal for multiple installations or large projects that require a uniform finish on all rails.

The Gola top profile cover serves the purpose of sealing the side parts of the profile, providing an aesthetic and functional finish.

The cover is specifically designed to fit Gola profiles with dimensions of 54x52.6 mm.

Yes, installation is simple thanks to an anchoring system with two screws included that ensure a precise and firm fit.

It is made of high quality aluminium, which guarantees strength and durability in daily use.

This cover is available in various finishes, such as white, black, anthracite, matt anodised, gold anodised and stainless steel anodised.

The following video shows how the sliding door system for wardrobes is assembled.

Carriage sets are selected depending on the door weight.Two weight ranges, one for doors up to 40kg and one for doors from 40kg to 80kg, are available for soft-close systems.

The following video shows how the sliding door system for wardrobes is assembled.

The handle has a total length of 184 mm and an interaxis of 160 mm, adapting to different furniture sizes.

It is made of aluminium with a black painted finish, giving it a modern design and high resistance to corrosion.

Yes, it is ideal for kitchen, bathroom, home and office furniture, thanks to its strength and versatile design.

The package includes a handle and the M4 screws required for mounting, individually packaged to prevent damage.

Yes, its aluminium construction and hard-wearing finish make it ideal for furniture that is subject to intensive use.

This kit is designed for sliding doors hung in wood, compatible with the Railway ceiling mounting system. It is ideal for boards from 18 to 40 mm thick.

The kit includes all fittings and fixings required for the assembly of 1 sliding door with integrated brake, including carriages, brake, bottom guide, fixings and adjustment tool.

The brake is automatically activated on closing, providing a cushioned movement without the need to machine the rail. Protects the furniture and enhances the user experience.

It incorporates 4-wheel carriages with ball bearings that guarantee smooth, silent and stable sliding. In addition, they allow height adjustment of up to 10 mm.

No. The included guide is designed to work with a standard bottom groove, and allows the door to remain stable during opening and closing without additional machining.

It is designed for wall mounting the top rail of the Railway system on suspended sliding doors. It is particularly useful when it is not desired to fix the rail to the ceiling or when a solution with a visible and accessible finish is required.

Yes, its design has been optimised to fit perfectly with the top rails of the Railway system, allowing a firm and stable fixing of the top profile to the wall.

The bracket measures 43.3 mm wide × 63.5 mm high. It is made of aluminium with a matt anodised finish, offering durability and a modern and uniform aesthetic with the rest of the elements of the system.

It is installed by screwing directly to the wall. The system is fast and safe, and also allows the subsequent assembly of the front covers to conceal the fittings and improve the aesthetics.

The packaging contains 5 individual anchors, ready to be used together with the Railway system and the corresponding profiles and covers.

The rail is installed by bolting directly to the ceiling or top panel of the enclosure. Its profile allows the use of additional anchors to improve rigidity in hanging installations.

The rail has a cross section of 42.5 mm high x 54.5 mm wide. It is designed to integrate directly into the Railway system of suspended overhead trolleys, ensuring stability of travel.

Yes, provided the appropriate Railway trolleys are used, it can support doors up to 80 kg per door leaf, ensuring smooth and safe guidance.

Yes, the 2 m and 3.9 m versions can be easily cut to the desired length with standard tools, always respecting the squareness for correct sliding of the trolleys.

The profile is made of aluminium with a matt anodised finish, which gives it resistance to corrosion, durability and a neutral aesthetic that can be adapted to any type of furniture.

It is designed to be installed in cabinets with 21 mm thick panels, without the need for height adjustment systems. It is fixed by means of standard screws included in the kit.

The system is prepared for 2 or 3 doors, with distribution of 1 inner + 1 outer leaf (or 2 inner + 1 outer in the case of SKU 6051620), allowing sliding without interference between leaves.

This kit supports up to 50 kg per leaf, thanks to the metal ball bearings mounted on steel plates, guaranteeing a smooth and safe movement.

The boards must have a fixed thickness of 21 mm. It is not recommended to use it in lower or higher thicknesses, as this will compromise the stability of the system and the correct fitting of the fittings.

No, this kit is the version without brake or soft-close system. For a cushioned closure it is necessary to opt for the Neco kit with soft-close or regulation, compatible with the same type of rails.

The Railway system is designed for suspended installation, fixed directly to the ceiling or to an overhead structural panel. It is recommended for installation on solid surfaces such as solid wood, structural boards or metal profiles, with fixings suitable for the type of support and weight of the door.

The kit is designed for wooden doors with a minimum thickness of 18 mm. The system is suitable for solid doors as well as for technical panels, provided that the installation tolerances of the wheel system and the integrated damper are observed.

Two versions of the Railway kit are available: one for doors up to 40 kg and one for doors from 40 to 80 kg. Both versions include sealed ball bearing trolleys and a shock absorbing brake that ensures controlled closing even with large doors.

The kit includes 4 castors, shock absorbing brake, fixings, bottom guide and tools such as Allen key. Standard tools such as drill, screwdriver and level are required for installation. No special machining of the door is required, which speeds up installation.

Yes, Railway trolleys allow height adjustment to correct any deviations after the door has been hung. This functionality facilitates alignment and ensures optimum operation of the soft close and friction-free travel.

The glider offers a static support with point movement capability, ideal for furniture that does not require constant mobility. It takes up less space, is visually unobtrusive and avoids the use of mechanical systems such as bearings or spindles.

It is designed for use on wooden, parquet, ceramic or laminate floors. Its technical plastic backing reduces friction and protects surfaces thanks to its low coefficient of friction. Not recommended for use on carpets or thick rugs.

It is perfect for low or static furniture such as wardrobe modules, chests of drawers, sideboards, auxiliary furniture or beds. It is also widely used in hotel and contract furniture where stability and easy cleaning of the floor is a priority.

It is installed by pressing or tapping the metal tip into the base of the furniture through a guide hole (recommended Ø2 mm). For hard materials such as solid wood or plywood, it is advisable to use a pre-drill to avoid splintering.

Thanks to its technical polymer design and metal tip, the glide retains its shape and performance even after years of use. It does not deform easily, withstands moderate point loads and its bearing surface retains its even glide over time.

According to the ISO standard: 7170:2005 Emuca supports can take a maximum weight of 40 kg per metre evenly distributed.

The set contains 4 castors: 2 with brakes and 2 without brakes, together with all the screws required for installation using a mounting plate.

The castors have a diameter of 60 mm and can carry a maximum load of up to 30 kg per unit, ensuring stability in home or office use.

These castors are made of a plastic structure and a zinc-plated steel metal plate, which gives them wear resistance and a long service life.

Yes, thanks to their integrated ball bearings, the castors ensure a smooth and quiet running, ideal for floors that require extra care.

The plastic coating provides a double function: it improves the fixing by reducing play during assembly and acts as an insulator that protects the joint against vibration or noise. In addition, it improves sliding during assembly with eccentrics.

It is specifically designed for use with the K12 eccentric, forming a strong and secure jointing system for kitchen units, wardrobes and beds. The bolt end fits into the standardised eccentric housing.

The bolt has a total length of 33 mm, with an anchorage area of 17 mm in the cabinet and a shank diameter of 6 mm. These dimensions optimise the load distribution in transverse joints without compromising the structural stability of the module.

Zinc plated finish provides effective protection against rust, ideal for wet environments or where durability is required. Increases component life without affecting fit tolerances or compatibility with standard hardware.

This bolt is widely used in furniture assembly on production lines, especially in kitchen modules, bed frames and demountable cabinets. The 2500-unit packaging makes it easy to supply for high-volume industrial projects.

These brackets are designed for screw fixing to the furniture surface, providing sturdy 90° right-angle connections between wooden boards using conventional screws.

The brackets are made of sheet steel with a zinc-plated finish, which provides high mechanical strength, protection against rust and excellent performance in interior assemblies.

Each bracket measures 42 mm high by 42 mm wide and has a sheet thickness of 1.5 mm, which allows it to maintain rigidity in demanding joints without adding unnecessary bulk to the furniture.

It has 4 holes for fixing screws, allowing a secure and balanced mounting. Self-tapping screws with a diameter of up to 4.5 mm are recommended.

They are ideal for joining panels at right angles in structures such as cabinets, modules, shelving and other interior furniture. They are also frequently used in reinforcement and rapid assembly processes in production lines or craft assemblies.

The bracket is designed to accommodate glass shelves with a maximum thickness of 8 mm, a length of up to 180 mm and a width of 130 mm. These specifications ensure correct support and load distribution.

A 5 mm diameter cylindrical hole is required for mounting the bracket. This design allows quick and secure installation in side panels of cabinets or display cabinets.

The nickel-plated zamak body provides structural strength and durability, while the plastic head prevents damage to the glass and ensures a non-slip grip. This combination maximises safety and service life.

The support is presented in packs of 1000 units, ideal for high rotation installations or industrial mass production. This presentation facilitates stock control and efficient warehouse replenishment.

Yes, thanks to its aesthetic nickel-plated finish and compact design, it is ideal for both display cabinets and domestic cupboards. Its visual discretion makes it a functional and decorative solution.

The 21B bracket is installed by embedding the dowel into a vertical panel. This system does not require complex tools, as the dowel is inserted into a pre-drilled hole 10 mm in diameter and 14 mm in height, ensuring fast and efficient fixing.

The support area is 12 mm long and the dowel is 8 mm long with a diameter of 5 mm, which allows a safe and stable insertion of the glass without displacement during use.

The nickel-plated finish provides a layer of protection against corrosion and rust, improving the durability of the component even in wet environments or when exposed to cleaning products.

This bracket is designed to securely hold flat glass shelves, commonly used in display cabinets, bathroom furniture or home furnishings. The plastic base prevents direct contact between the metal and the glass, protecting it from damage.

The product is sold in batches of 1000 units, making it an ideal solution for manufacturers, distributors or large-scale installations requiring multiple media in an efficient manner.

The bracket is fixed by means of a screw through a 6 mm diameter hole, ensuring a firm attachment to the vertical panel of the furniture.

The bracket has an 18 mm wide base, requires a 10 mm wide hole in the mounting area and a height from the base to the fixing hole of 8 mm.

Zamak is a metal alloy that provides high mechanical strength, durability against wear and a nickel-plated finish that enhances corrosion protection.

The following video shows how you can easily assemble the profile system Gola.

Yes, thanks to its Zamak construction and screw fixing design, this bracket is ideal for shelving or horizontal panels with strength requirements in professional carpentry applications.

The packaging includes 2,500 units, making it ideal for furniture manufacturers, industrial installers and distributors who require efficiency in high-volume projects.

The Gola system joining accessories are created using plastic (grey or white finish), and also, the accessories that are positioned on corners or corner edges require the profile to have a mitre joint.On the contrary, the straight cut accessories are created from matt silver anodized aluminium, and also, with all of them the profile only needs a straight cut, therefore preparation is easier.

The bracket is fixed by means of a screw that is inserted into the vertical panel. Additionally, it incorporates a dowel embedded in the horizontal panel, which reinforces the stability of the shelf in load-bearing applications.

The orientation dowel has a diameter of 5 mm and is inserted into a 5 mm diameter hole, helping to maintain the correct alignment of the shelf during installation.

The support area of the bracket has a 14 mm long and 12 mm wide base, providing a stable surface for the placement of horizontal wooden panels.

The bracket is made of steel and zamak, with a nickel-plated finish. This combination gives it mechanical strength, durability and corrosion protection, ideal for use in kitchen, home or office furniture.

The shelf bracket is packaged in packs of 1000 units, making it easy to store and use in mass production environments or professional furniture assembly.

The bracket is fitted into the side of the cabinet through a Ø 6 mm hole. No special tools are required other than a drill bit of the indicated diameter and a hammer for press-fitting.

Thanks to its nickel-plated zamak construction, the bracket offers high mechanical strength, ideal for domestic and light industrial shelves, guaranteeing stability on standard thickness boards without deformation.

The support is L-shaped and has a shelf that supports the board and a vertically oriented dowel that is inserted into a drill hole. This double fixing ensures firmness and prevents the shelf from sliding sideways.

The body measures 12 mm wide x 14 mm long, while the insertable dowel is 7.5 mm long and Ø 5 mm. This geometry makes it compatible with most modular furniture using solid wood or melamine shelves.

The support is presented in boxes of 1,000 units, designed for distributors, industrial carpentry and furniture manufacturers who require large volumes with easy storage and replenishment.

The following video shows how you can easily install the Pegasus illuminating bathroom mirror.

The following video shows how you can easily install the Cassiopea backlit bathroom mirror.

The following video shows how you can easily install the Hercules mirror with built-ib lighting.

Thanks to its zamak material of construction, the 21A bracket offers excellent mechanical strength and durability similar to steel and is suitable for typical loads in horizontal wooden shelving applications in cabinets and professional furniture.

The bracket requires a Ø 5 mm diameter and 8 mm deep hole in the vertical panel where it will be fixed. The wooden panel to be installed must have a 10 mm wide by 12.5 mm long borehole to properly accommodate the fastening plug.

Yes, the nickel-plated finish not only provides a shiny, professional aesthetic, but also acts as protection against rust and corrosion, ensuring a long service life even in humid or demanding environments.

This bracket has been designed in the shape of a square for horizontal mounting, ideal for shelving. It is always installed on the vertical panel of the cabinet or cupboard, with the wing of the bracket at right angles to support the wooden shelf.

The 21A bracket is delivered in a standard package of 1000 units, optimised for distributors, furniture manufacturers and carpenters who require volume in production lines or large scale projects.

The zinc-plated finish provides a layer of corrosion protection that enhances the durability of the double bolt in wet or frequently used environments. This makes it a reliable choice for bed frames, tables and cabinets that require long term, durable joints.

This model is specially designed to work with T15 or T15 type eccentrics, offering a precise and secure fit for the assembly of furniture components, with no play and excellent clamping capacity.

The double bolt can be installed in 16 mm and 19 mm thick boards, which are the standard thicknesses in modular furniture manufacturing, allowing for easy integration into automated production processes.

It is essential to drill a 7 mm diameter hole with a depth that ensures the correct fit of the bolt without compromising the stability of the board. It is also recommended to check the alignment with the eccentric to ensure a firm assembly.

The T15 double bolt for eccentric cams is presented in boxes of 500 units, facilitating stock management on production lines and wholesale distributors. Its format is ideal for large-scale furniture assembly and manufacturing projects.

Each set of Shelf supports offers a maximum load capacity of 30 kg, suitable for domestic or decorative storage shelving.

Installation is carried out by attaching the brackets to the side of the board and then to the wall using the screws and plugs included, without the need for additional elements.

It is recommended to install 600 mm wide by 200 mm deep boards to ensure proper support and weight distribution.

Additional bracing is not necessary as long as the manufacturer's installation and loading recommendations are followed.

These stands are designed for applications in both domestic environments (kitchens, living rooms, bathrooms) and in small commercial or retail environments that require visually neat organisation.

The trolley has a height of 487 mm, a width of 245 mm and a depth of 470 mm. It is compatible with 300 mm wide modules and 16, 18 and 19 mm boards.

Includes one basket with frame, one set of full-extension slides with cushioned locking and mounting screws.

The trolley is mounted directly on the module base by means of full-extension slides with cushioned locking, which facilitates precise and silent installation.

It allows adjustments in depth (±1.5 mm), horizontality (±2.25 mm) and height (±7.5 mm), making it adaptable to different kitchen configurations.

It can hold up to 25 kg and is made of steel with a chrome finish, ideal for efficient and safe daily use in modern kitchens.

The Mixline topknot has a length of 3.9 metres and is packaged in 10 pieces.

It is made of semi-flexible plastic parts, which adapt to the surface, and a satin anodised aluminium coating on the front, which improves the strength and aesthetics of the product.

The top prevents liquids from coming into contact with the back of the furniture, protecting the modules from possible leaks or water damage.

Installation is simple and quick, but it is recommended that it is carried out by two people and that trims are used to ensure an airtight finish and prevent leaks.

It is suggested not to leave any holes through which water could leak, especially when joining several pieces of the coping.

The kit includes 8 grey plastic fittings designed to facilitate the assembly of Plasline triangular copings. Each part has a structural and fixing function to ensure a precise and secure assembly of each part of the coping.

The accessories are made of semi-flexible grey plastic. This material offers an excellent adaptation to the surfaces, protects the installation materials and avoids friction or wear between the top and the wall, extending the life of the assembly.

They are intended to secure the attachment of the coping to the surface, prevent leakage of liquids and eliminate direct contact between the coping and the wall. In addition, they guarantee a clean, stable and durable assembly, even in demanding environments such as kitchens.

No, it is designed exclusively for the Plasline Grey triangular top. The parts of the kit are adapted in shape and dimensions to fit this kitchen plinth system only.

Yes, due to the small size of some parts, it is recommended to keep them out of the reach of small children, especially during assembly, to avoid the risk of improper handling.

The following video shows how you can easily install the Zero system.

The fittings are made of semi-flexible grey plastic, which allows a high adaptability to the angles of the furniture and a more precise installation, even on uneven surfaces.

The pieces ensure that the ends of the coping are correctly fixed, preventing liquids from seeping in and damaging the material. They guarantee an effective seal to maintain the impermeability of the assembly.

The kit includes 8 accessories per unit, in a packaging of 20 kits. Each kit provides all the necessary elements for the complete installation of a Mixline satin cope.

Yes, they are designed for fast and safe assembly, without the need for complex tools, which optimises time for serial installations or large-scale projects.

The mechanism raises the surface 13,5 cm from the table.

The installation must be carried out in direct contact with the kitchen wall, avoiding any space that could allow water filtration. To achieve a perfect fit, it is recommended to use trims that seal the spaces between the coping and the wall. Due to its length, it is recommended that the installation is carried out by two people.

The top is made of plastic with a satin anodised finish. This finish provides high resistance to wear and tear due to daily use, preventing deterioration of the material due to contact with liquids or splashes common in the kitchen.

The cups are press-fitted with the aid of trims and base profiles, which ensure a firm grip. Although it is possible to dismantle them, it is not recommended to do so frequently, as this may affect the tightness of the system or deform the material.

Both models are made of plastic with a satin anodised finish and share the same triangular design and functionality. The main difference is the length: the 2.35 m is intended for standard or smaller scale projects, while the 3.9 m is ideal for continuous linear installations, reducing the need for joints.

No, they do not include covers, which are sold separately. They only include the aluminium profile and the diffusor profile.

No, it is only compatible for devices that charge using the QI protocol.

The mechanism raises the table 13'5cm.

The kit incorporates 40 self-adhesive silicone drops, which are placed on the base of each tray to prevent movement during the opening or closing of the drawer, ensuring stability without the need for mechanical fixing.

They are made of heavy-duty transparent plastic, which makes the contents easily visible, enhances product durability and withstands heavy use in domestic or commercial environments.

Yes, the design allows cubes to be stacked and combined between different kits, which is ideal for projects where modularity and adaptability in drawer distribution is required.

The kit includes 6 cubes of 75x75x54 mm, 3 cubes of 75x151x54 mm and 1 cube of 153x153x54 mm, which allows a flexible and customisable layout according to the width of the drawer, facilitating its integration in customised projects.

Yes, its waterproof material and closed design make it ideal for use in damp environments such as kitchens and bathrooms, preventing moisture build-up or deterioration.

The following video shows how you can easily assemble the Simply hidden shelf bracket.

An operational E-Fan air freshener emits 28 decibels, a reduced value considering that the WHO establishes that a continuous noise level of less than 30dB is suitable for resting.

The noise levels suitable for our environment depend on our activity, considering we are continuously surrounded by noise such as vehicle traffic, industries and construction sites. Exposure to prolonged noise can affect our health causing stress, anxiety, irritability, insomnia, fatigue, headache, dizziness, hypertension, muscle tension, heart problems, hearing loss (temporary, irreversible or progressive) and tinnitus. The range of human’s ear audible sounds is from 0 to 120 decibels (dB), 75dB can be harmful, depending on intensity or exposure time. The noise levels in our environment should be as follows: - At home from 40 to 50dB. These are the typical values of a quiet room and a conversation with no environmental or background noise. - To sleep 30dB. The WHO establishes that continuous noise should not exceed 30dB as it can disturb sleep quality, and an instantaneous noise should not exceed 45dB since it can result in waking us up in the night. - At work 60dB. The usual office environment noise level is 60 dB, being 85dB the maximum allowed in Spain for an eight-hour workday, in case the intensity increases by 3dB, the noise exposure time should be halved. - In the city from 50 to 90dB. The range is 50 to 90 dB, depending on the city vehicles traffic and the instantaneous noise such as sirens and alarms.

It is installed by recessed mounting on the side of the cabinet, ensuring a firm hold.

It is recommended to install it on side panels at least 16 mm thick to ensure stability and strength.

To install the bumper it is necessary to carry out a machining of Ø5 mm and 10 mm deep, in this way the bumper is correctly embedded in the panel.

Yes, it is possible to recharge the Rigel light with a mobile phone charger. The charger needs to have a type B micro USB and should at least supply 5V DC 0,5A.

The charging time will vary depending on the amperage of the charger. It is recommended to use 5V DC 1A chargers, therefore the estimated charge time is 2 hrs.

The hanger has a maximum load capacity of 12 kg, which allows several garments to be hung without affecting its function.

Its width is adjustable from 600 mm to 830 mm, allowing it to be adapted to different cabinet sizes.

Yes, it can be installed either on the side wall of the wardrobe or on the back wall, depending on the configuration of the wardrobe or dressing room.

The hanger incorporates a damped return system, providing a smooth and controlled movement when lowering and raising.

The product comes complete with all screws and hardware required for mounting, making it easy to install without the need for additional accessories.

This light has a range of 600 switching cycles per charge before the battery runs out and it has an LED indicator that goes from red to green when the charge is complete following an approximate time of 2 hours.

The RAL code of the anthracite grey finish of the sides of the Concept drawer is approximately 7043. The RAL code of the white finish of the sides of the Concept drawer is approximately 9003.

This kit is designed for mounting tempered glass shelves on Zero system profiles. The glass must have a suitable thickness and be machined or with polished edges, depending on the final design.

Each batch allows for the installation of 5 glass shelves and includes: 5 sets of metal brackets, 20 accessory covers for embellishment and safety. Glass shelves and Zero profiles are purchased separately.

The brackets are fitted directly onto the Zero profile without the need for adjustment tools. The design of the system allows fast, precise installation without drilling into the glass, thanks to an internal clamp.

Each shelf, correctly installed in the Zero system, can support more than 100 kg per module, provided that the glass has the appropriate thickness and treatment (recommended: tempered safety glass).

Available in stone grey (RAL 7048) and textured black (RAL 9005), both on zamak, the design and finish of these brackets ensure premium visual integration in domestic, commercial and contract environments.

This bracket is specifically designed for cabinet rails with an oval cross-section of 30x15 mm, ensuring a precise and secure fit without the need for adapters.

The bracket is mounted recessed in the side panel of the cabinet, requiring a customised cavity to be milled or drilled. This type of mounting ensures clean aesthetics and excellent structural strength.

Yes, it can be combined with specific central supports for 30x15 mm bars in long or high load installations. This allows alignment to be maintained and prevents excessive bending of the bar over 1000 mm.

The following video shows how you can easily assemble the Concept drawer.

The following video shows how such a system is easily assembled:

Yes, although the use of two devices provides greater stability when opening. In addition, it is recommended to use two lifting systems on doors over 1 metre wide.

The Mago manual machine allows you to assemble drawers quickly and efficiently, making it easy to bend the flanges of the ribs and fix them to the side of the drawer.

It uses compressed air to actuate a trigger that automatically bends the tabs of the rib, ensuring it is secured to the side flap of the drawer without the need for additional tools.

Unlike other manual methods, this machine speeds up assembly, improves accuracy and reduces physical effort, which optimises production in carpentry workshops.

It is ideal for carpentry and furniture workshops, where large volumes of drawers need to be assembled quickly and accurately.

It has no limitations on the depth or width of the drawer, as its design allows it to adapt to any size without affecting the quality of the assembly.

The front attachment kit is designed specifically for the 141 mm high Vantage-Q internal drawer. It is compatible with square side rails, allowing the installation of front panels in internal storage systems.

This product requires direct mounting on the side and front panels of the drawer. It is recommended to be installed on clean, flat surfaces using the included fixings. The modular design allows for precise adjustment to ensure a tight and aligned installation.

The set is made of high quality plastic with a grey or white finish. This material combines lightness with excellent impact resistance, guaranteeing durability in everyday environments.

The design of the hooks ensures a robust fixing between the front panel and the side rails. In addition, it acts as a reinforcement in the corner of the drawer, preventing unwanted movement and ensuring stability over time.

This accessory is designed according to Emuca quality standards to ensure reliability. Although no specific international standards are specified, its optimised design minimises risks of assembly and use, providing safety in storage facilities.

The kit includes soft-close full-extension slides, a set of ribs, a set of rear hooks, a set of front hooks and screws for mounting.

This drawer supports up to 40 kg load. Its slides allow full-extension with soft closing, which guarantees smooth sliding and no jerky bumps when closing.

It is made of painted steel with a metallic grey RAL 7045 finish, which provides strength, durability and a modern aesthetic for different styles of furniture.

Yes, it is necessary to purchase the cut-to-size boards for the bottom, back and border of the drawer separately, as they are not included in the kit.

It is ideal for use in kitchens and bathrooms, providing a sturdy, stylish and easy to install storage system with a smooth and robust opening for everyday use.

Yes, the drawer measurements, including its dimensions and machining, are fully compatible. The board cutting measurements, mounting dimensions and placement of the drawer in the module are exactly the same.This allows customers to mount 30 kg Concept slides and 50 kg slides on the same drawer.

The RAL code of the anthracite grey finish of the sides of the Concept kitchen, household and bathroom drawer is approximately 7043.The RAL code of the white finish of the sides of the Concept kitchen, household and bathroom drawer is approximately 9003. Although it is necessary to bear in mind that the white silk colour of said drawer is metallized and the RAL codes are for flat colours.

The board cutting dimension and the position of the hook on the front are different. However, the hole pattern of the guide rail is the same for the Concept, Vantage-Q and Slim drawers.